We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow plastic probe with LED tip and headphone jack

aFe Power Probe-PRO Tracing Probe with LED Work Light

SKU CH-X25F-6SSGY

Hand-powered tracing probe locates non-energised wires with a replaceable conductive tip, built-in work light and 3.5 mm headphone jack for noisy environments

  • FeaturesProbe-PRO Tracing Probe, Hand_powered, true
  • Height9 L x 1.2 W x 1.4 H inches
  • Width9 L x 1.2 W x 1.4 H inches
  • Length9 L x 1.2 W x 1.4 H inches
  • Weight5.7 ounces
  • Sports Team1 Piece
  • Traces non-energized wiring with Toner-Pro generator
  • Replaceable non-metallic conductive tip ensures lasting accuracy
  • Built-in LED work light illuminates dark work areas
  • 5 mm headphone jack enables use in noisy environments
  • Terminal block confirms toned pair for confident identification

Probe-PRO Tracing Probe for Non-Energized Wiring

The aFe Power Probe-PRO tracing probe identifies open-ended, non-energized cables when paired with the Toner-Pro tone generator (VDV500-063, sold separately). It suits electricians, low-voltage installers and network technicians who must locate Ethernet, telephone, speaker, coax, video or data cables terminated with RJ45, RJ11 or RJ12 connectors.

Requires Separate Tone Generator and Headphones

The probe cannot inject a tone; it only detects the signal from the Toner-Pro generator, so that unit must be purchased separately. Audio feedback relies on the built-in speaker or the 3.5 mm headphone jack, but headphones are not included, limiting usability in very noisy environments unless the buyer supplies their own.

Tool-Less Tip Replacement and Simple Power Control

A twist-and-lock mechanism swaps the replaceable non-metallic conductive tip (Cat. No. VDV999-068) without tools. One push of the power button activates the probe and its LED indicator, removing the need to hold the button down. Buyers who need an all-in-one toner-and-probe kit or a probe powered by rechargeable cells will not find those features here.

Highlights

  • Traces non-energized wiring with Toner-Pro generator
  • Replaceable non-metallic conductive tip ensures lasting accuracy
  • Built-in LED work light illuminates dark work areas
  • 5 mm headphone jack enables use in noisy environments
  • Terminal block confirms toned pair for confident identification

Specifications

BrandaFe Power
FeaturesProbe-PRO Tracing Probe, Hand_powered, true
Height9 L x 1.2 W x 1.4 H inches
Width9 L x 1.2 W x 1.4 H inches
Length9 L x 1.2 W x 1.4 H inches
Weight5.7 ounces
Sports Team1 Piece
TypeClamp

Questions about this item

Should I choose the Probe-PRO or the Toner-Pro for tracing open-ended cables?

The Probe-PRO traces non-energised wiring only when paired with the Toner-Pro tone generator (VDV500-063), which is sold separately.

What does the 3.5 mm headphone jack actually do on a job site?

It lets you plug in headphones for clear audio tone detection in loud environments so you can trace cables without ambient noise interference.

How does the RJ45, RJ11 and RJ12 listing affect which cables I can trace?

Those connector types show the tone generator can inject a signal into Ethernet, telephone and data cables, and the probe will trace them when the pair is toned.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.