We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
aFe Power 200EP tone generator kit in plastic case with probe and clamp leads

aFe Power 200EP Tone Generator Kit Electrical System Tool

SKU CH-3Q55-4CCZS

A tone generator and probe kit for tracing non-energised cables up to 24 V with 30 dB gain and 100 M Ohm input impedance

  • Featurestone generator wire tracer, Battery Powered, false
  • Weight300 grams
  • TypeClamp
  • Accurate cable identification with one-button operation and inductive probe
  • High input impedance of 100M Ohm for sensitive signal detection
  • Nominal 30dB gain amplifies weak tones for clear tracing
  • Lightweight 300 gram design with carrying bag for portability
  • Operates on a single 9V battery for up to 50 hours

Tone Generator Kit for Cable Maintenance

The aFe Power 200EP tone generator and probe kit is built for technicians tracing non-energised cables or circuits below 24 volts. It suits network installers and maintenance crews who need to identify individual wires quickly. The tool is not intended for high-voltage work or live mains tracing.

Carrying Bag and Battery Requirements

A supplied carrying bag protects the generator and probe during transport and storage. The unit requires one 9V battery (NEDA 1604, JIS 006P or IEC 6LR61) which is not included; nominal battery life is 50 hours. Gain is rated at 30 dB with 100 M ohm input impedance.

One-Button Operation and Usage Limits

Operation uses a single button: clip the generator onto the target wire and trace with the probe for identification in about one second. The probe tip offers 0 ohm resistance on metal and 300 ohm on plastic. Accuracy drops on energised lines above 24 volts, and the kit cannot measure live mains circuits.

Highlights

  • Accurate cable identification with one-button operation and inductive probe
  • High input impedance of 100M Ohm for sensitive signal detection
  • Nominal 30dB gain amplifies weak tones for clear tracing
  • Lightweight 300 gram design with carrying bag for portability
  • Operates on a single 9V battery for up to 50 hours

Specifications

BrandaFe Power
Featurestone generator wire tracer, Battery Powered, false
Weight300 grams
TypeClamp

Questions about this item

How often will I need to replace the 9V battery during regular use?

The nominal battery life is 50 hours, so a fresh 9V cell will last through many tracing sessions before needing replacement.

What is the highest voltage cable I can safely trace with this kit?

The tracer is designed for non-energised cables or low-voltage circuits below 24 V; it must not be used on live mains wiring.

How much heat or noise does the probe generate when left on for a full workday?

The probe runs on a single 9V battery with no fan or active cooling, so it produces negligible heat and no audible noise during extended use.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.