We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 10 m SFP+ direct attach copper cable with SFP+ connectors both ends

AddOn

AddOn SFP-H10GB-ACU10M-AO 10 m SFP+ direct attach network ethernet cable

SKU CH-47S7-T7G9X MPN SFP-H10GB-ACU10M-AO

A 10 m SFP+ to SFP+ direct attach cable for 10GBase-CU links up to 32.8 ft

  • Connector ASFP+
  • Connector BSFP+
  • Length32.80 ft.
  • ColorBlack
  • FeaturesThis is a Cisco SFP-H10GB-ACU10M compatible 10GBase-CU SFP+
  • 10 m reach for 10 GbE links over active copper
  • SFP+ to SFP+ direct attach avoids separate transceivers
  • Hot-swappable design enables changes without network downtime
  • Pre-programmed OEM data ensures instant Cisco compatibility
  • Black 32.8 ft cable suits rack-to-rack deployments

Product Identity

This 10 metre SFP+ direct attach cable connects two SFP+ ports for 10GBase-CU links. It suits data-centre operators and network engineers who need a factory-programmed, Cisco-compatible twinax assembly for short-reach uplinks.

Build and Connectors

Each end carries an SFP+ connector that inserts into a standard Gigabit Ethernet slot and supports hot-swap replacement without powering down the switch. The black active copper assembly is uniquely serialized and pre-loaded with OEM configuration data so it initialises identically to the original transceiver.

Thermals Noise Power

Passive copper construction means no onboard active components, so the cable adds no audible noise and draws negligible power from the port. Heat dissipation is limited to the minimal resistive loss of the twinax conductors over the 10.0m reach.

Highlights

  • 10 m reach for 10 GbE links over active copper
  • SFP+ to SFP+ direct attach avoids separate transceivers
  • Hot-swappable design enables changes without network downtime
  • Pre-programmed OEM data ensures instant Cisco compatibility
  • Black 32.8 ft cable suits rack-to-rack deployments

Specifications

BrandAddOn
ModelSFP-H10GB-ACU10M-AO
Connector ASFP+
Connector BSFP+
Length32.80 ft.
ColorBlack
FeaturesThis is a Cisco SFP-H10GB-ACU10M compatible 10GBase-CU SFP+ to SFP+ direct attach cable that operates over active copper with a maximum reach of 10.0m (32.8ft). It has been programmed, uniquely serialized, and data-traffic and application tested to ensure it is 100% compliant and functional. Our direct attach cables are built to comply with MSA (Multi-Source Agreement) standards. This direct attach cable is TAA (Trade Agreements Act) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty.
Shipping weight0.64 kg
Package size25 × 25 × 23 mm

Questions about this item

What data rate does the 10GBase-CU direct attach cable support?

The cable is built for 10GBase-CU, so it carries 10 Gb/s over its full 10.0 m reach.

What physical space and port type does the SFP+ connector require?

Each end uses a standard SFP+ form factor that fits any SFP+ cage; the 10 m twin-ax assembly needs enough clearance for the cable bend radius.

How is the cable installed and what step is often missed?

Insert both SFP+ ends into powered ports until they click; the module is hot-swappable, but the link will not come up until both sides are fully seated.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.