We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Aqua duplex fiber patch cable with ST and LC connectors, 9.84 ft

AddOn

AddOn ADD-ST-LC-3M5OM3 9.84 ft ST to LC Aqua OM3 Duplex network ethernet cable

SKU CH-Q1AS-NW753 MPN ADD-ST-LC-3M5OM3

A 9.84 ft aqua duplex patch cable with ST and LC male connectors for 10Gb ethernet links

  • TypeDuplex
  • Connector AST (Male)
  • Connector BLC (Male)
  • Length9.84 ft.
  • ColorAqua
  • FeaturesThis high quality SMF (9/125) patch cable is specifically de
  • 84 ft length fits rack-to-rack runs
  • Aqua jacket identifies OM3 multimode fibre at a glance
  • ST to LC connectors link legacy and modern gear
  • Duplex design carries transmit and receive in one cable
  • LSZH riser-rated sheath meets fire-safety requirements

ST-to-LC duplex patch cable

This 9.84 ft aqua cable connects ST male and LC male connectors in a duplex arrangement. It is built for Ethernet, multimedia or communication links that require OM3 multimode performance. The riser-rated jacket suits indoor vertical runs in LAN or SAN environments. Buyers needing single-mode or alternative connector types should select a different cable.

Thermals noise and power

As a passive fiber assembly the cable generates no heat, emits no noise and draws no power during operation. Signal attenuation follows OM3 multimode specifications without active components. Installation routing does not create thermal constraints for surrounding equipment.

Riser rating and aqua identification

The riser-rated jacket allows deployment between floors in commercial buildings without additional conduit. Aqua colour coding identifies the OM3 multimode class at a glance for faster patch-panel management. No software or active accessories are bundled with this cable.

Highlights

  • 84 ft length fits rack-to-rack runs
  • Aqua jacket identifies OM3 multimode fibre at a glance
  • ST to LC connectors link legacy and modern gear
  • Duplex design carries transmit and receive in one cable
  • LSZH riser-rated sheath meets fire-safety requirements

Specifications

BrandAddOn
ModelADD-ST-LC-3M5OM3
TypeDuplex
Connector AST (Male)
Connector BLC (Male)
Length9.84 ft.
ColorAqua
FeaturesThis high quality SMF (9/125) patch cable is specifically designed for ethernet, multimedia, or communication applications, and is intended for use with 10Gb applications. This patch cable is suited for LANs or SANs, and is recommended for connection between fiber patch panels, hubs, switches, media converters and routers, etc. The low smoke zero halogen (LSZH) jacket protects from toxic and corrosive gases in badly ventilated spaces and other areas where it is most crucial. It also provides the fire protection needed to run within walls and air plenums eliminating the need for condu
Shipping weight0.18 kg
Package size330 × 279 × 51 mm

Questions about this item

How do I install the ST and LC connectors on this 9.84 ft duplex patch cable?

Align the key on each male ST and LC connector with the corresponding port slot, push straight in until the ST bayonet locks with a quarter-turn and the LC latch clicks; the most common mistake is twisting the ST before it is fully seated, which can damage the ferrule.

What maintenance or replacement will this aqua OM3 duplex cable need over time?

Inspect the ceramic ferrules on both ST and LC ends for dust or scratches before each reconnection; clean with a lint-free wipe and isopropyl alcohol, and replace the patch cord if insertion loss exceeds the 10 dB budget for the link.

What is the first performance limit that appears during sustained 10 Gb use of this 125 µm fiber cable?

The 10 dB channel loss budget is typically reached before bandwidth or distance limits on OM3 fiber, so monitor link power margin; if loss approaches 10 dB, shorten the run or upgrade to lower-loss connectors.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.