We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Orange duplex fibre patch cable LC to ST connectors 2m length

AddOn

AddOn ADD-ST-LC-2M6MMF fibre optic cable 2m LC to ST OM1 duplex OFNR

SKU CH-49BG-4PNRZ MPN ADD-ST-LC-2M6MMF

A 2 m orange duplex patch cable with LC and ST connectors, OM1 62.5 µm fibre rated for 10 GbE up to 33 m and 100 MbE, OFNR riser jacket

  • 2m length fits short patch runs
  • LC male to ST male connectors link dissimilar transceivers
  • OM1 62.5 µm core supports 10 GbE up to 33 m
  • Duplex two-strand design enables simultaneous transmit and receive
  • OFNR riser rating approved for indoor vertical pathways

2 m LC-to-ST duplex fibre patch cable

This 2 metre orange patch cable connects LC male and ST male connectors in a duplex configuration. It is built to OFNR riser-rated standards for indoor vertical runs. The OM1 multimode fibre has a 62.5 micron core. It suits installers and network technicians who need a short indoor link between dissimilar transceiver interfaces.

Replaces legacy single-strand

Upgrading to this duplex cable lets a single run carry both transmit and receive signals, simplifying patch-panel management. The jump is worth it when existing cabling uses simplex fibres or mixed connector types that require adapters. The 10 Gigabit Ethernet rating up to 33 metres also covers faster backbone segments that older OM1 simplex cables could not support reliably.

Limited to OM1 bandwidth and indoor riser spaces

The 62.5 micron core caps reach at higher speeds, so 10 Gigabit Ethernet is only specified up to 33 metres. Longer runs or higher bandwidth needs exceed the modal bandwidth of this fibre grade. OFNR rating restricts use to riser and general indoor areas; it is not suited for plenum spaces or outdoor plant. Buyers needing extended reach or plenum safety must select a different cable class.

Highlights

  • 2m length fits short patch runs
  • LC male to ST male connectors link dissimilar transceivers
  • OM1 62.5 µm core supports 10 GbE up to 33 m
  • Duplex two-strand design enables simultaneous transmit and receive
  • OFNR riser rating approved for indoor vertical pathways

Specifications

BrandADDON
Shipping weight0.91 kg
Package size330 × 279 × 44 mm

Questions about this item

Will the LC and ST male connectors fit my existing patch panel ports?

Yes, the cable has one LC male and one ST male connector, both standard duplex interfaces for patch panels and transceivers.

How do I install this 2m duplex patch cable without damaging the fibres?

Remove the protective caps, align the keyed LC and ST connectors, insert until they click, and avoid bending the orange OFNR jacket tighter than a gentle curve.

When should I replace this OM1 62.5 micron cable?

Replace it if the jacket shows cracks, connectors are scratched, or you upgrade beyond 100 Megabit Ethernet or 10 Gigabit Ethernet runs longer than 33 meters.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.