We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

AddOn

AddOn ADD-ST-LC-1M9SMF 3.28 ft Simplex SC/LC OS1 Yellow network ethernet cable

SKU CH-WT5H-08VFV MPN ADD-ST-LC-1M9SMF

Single-mode 9/125 µm simplex patch cable with SC and LC connectors for 10 Gb Ethernet links

  • TypeSimplex
  • Connector ASC (Male)
  • Connector BLC (Male)
  • Length3.28 ft.
  • ColorYellow
  • FeaturesThis high quality SMF (9/125) patch cable is specifically de
  • Simplex SC to LC connectors enable direct single-mode links
  • 28 ft length suits short rack-to-panel runs
  • Yellow jacket identifies OS1 single-mode fibre at a glance
  • 9/125 micron core supports 10 Gb Ethernet applications
  • Designed for LAN and SAN deployment scenarios

Simplex SC to LC OS1 Patch Cable

This single-mode fibre patch cable measures 3.28 ft and uses a Simplex SC male connector on one end and an LC male connector on the other. The yellow jacket identifies it as an OS1 cable built with 9/125 µm fibre. It is intended for Ethernet, multimedia or communication links.

Suited for 10Gb LAN or SAN links

Installers terminating a single strand between SC and LC ports in a rack or wall box will find the correct connectors and fibre type here. Buyers who need a duplex assembly for transmit and receive paths, or who require OM3 or OM4 multimode fibre, should select a different cable.

9/125 µm single-mode fibre core

The 125 µm cladding with a 9 µm core defines the OS1 single-mode specification that determines reach and bandwidth. Matching this fibre geometry to the transceivers in use is the single check that confirms the cable will work in the link.

Highlights

  • Simplex SC to LC connectors enable direct single-mode links
  • 28 ft length suits short rack-to-panel runs
  • Yellow jacket identifies OS1 single-mode fibre at a glance
  • 9/125 micron core supports 10 Gb Ethernet applications
  • Designed for LAN and SAN deployment scenarios

Specifications

BrandAddOn
ModelADD-ST-LC-1M9SMF
TypeSimplex
Connector ASC (Male)
Connector BLC (Male)
Length3.28 ft.
ColorYellow
FeaturesThis high quality SMF (9/125) patch cable is specifically designed for ethernet, multimedia, or communication applications, and is intended for use with 10Gb applications. This patch cable is suited for LANs or SANs, and is recommended for connection between fiber patch panels, hubs, switches, media converters and routers, etc. The low smoke zero halogen (LSZH) jacket protects from toxic and corrosive gases in badly ventilated spaces and other areas where it is most crucial. It also provides the fire protection needed to run within walls and air plenums eliminating the need for condu
Shipping weight0.18 kg
Package size330 × 279 × 51 mm

Questions about this item

Should I choose the simplex or duplex version of this AddOn fiber patch cable?

This cable is simplex with one SC male and one LC male connector, suitable for single-strand links such as bidirectional transceivers or patch-panel cross-connects.

What does the 10 Gb application rating mean when the cable is installed in a live network?

The 9/125 µm single-mode fiber supports 10 Gb Ethernet distances far beyond the 3.28 ft length, so the link will run at line rate without distance-related errors.

Which connector standard do the SC and LC ends follow, and what performance does that cap?

Both connectors meet standard single-mode polish grades, capping insertion loss to typical industry values so the 10 Gb signal stays within budget across the patch.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.