We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

AddOn

AddOn ADD-ST-LC-1M6MMF 1m 62.5/125 OM1 LC/ST duplex fiber patch cable

SKU CH-SA2G-BQ23F MPN ADD-ST-LC-1M6MMF

A 1 metre orange duplex OM1 multi-mode patch cable with LC and ST connectors for 1 Gb Ethernet links

  • TypeOthers
  • ColorOrange
  • 1m duplex link for 1Gb Ethernet and SAN
  • 5/125 OM1 multi-mode fiber supports legacy networks
  • Orange LSZH jacket reduces toxic smoke in plenums
  • Molded ST and LC connectors resist pull strain
  • 28ft length fits rack-to-panel runs

1 metre OM1 duplex patch cable

This 1 metre multi-mode OM1 patch cable uses 62.5/125 micron fibre with ST male connectors on one end and LC male connectors on the other. The orange LSZH jacket meets low-smoke zero-halogen requirements for in-wall and plenum runs. It is built for 1 Gb Ethernet, multimedia or communication links between patch panels, switches, media converters and routers. Molded strain relief on each connector resists pulls and impacts during installation.

OM1 bandwidth headroom for 1 Gb links

The 62.5/125 micron core supports 1 Gb Ethernet over the full 1 metre length with margin for connector loss. OM1 bandwidth limits longer runs or higher speeds such as 10 Gb, so the cable is not suited for extended distances or multi-gigabit uplinks. Insertion loss stays low for short patch-panel hops, but the modal dispersion of OM1 fibre caps reach well below what OS2 single-mode would allow. The duplex construction provides separate transmit and receive fibres in one jacket.

LSZH jacket fits plenum and tight spaces

The low-smoke zero-halogen jacket lets the cable run inside walls, ceilings and air-handling plenums without conduit, freeing installers from metal raceway requirements. ST and LC connectors mate directly with common patch-panel ports, media converters and switch transceivers, so no hybrid adapters are needed. The 3.28 ft length keeps slack minimal in rack enclosures while still reaching adjacent equipment. Builders needing longer spans or single-mode performance should select a different cable type.

Highlights

  • 1m duplex link for 1Gb Ethernet and SAN
  • 5/125 OM1 multi-mode fiber supports legacy networks
  • Orange LSZH jacket reduces toxic smoke in plenums
  • Molded ST and LC connectors resist pull strain
  • 28ft length fits rack-to-panel runs

Specifications

BrandAddOn
TypeOthers
ColorOrange
Shipping weight0.23 kg
Package size178 × 127 × 51 mm

Questions about this item

Will the 62.5/125 µm OM1 fiber work with my existing ST and LC patch panels?

Yes, the duplex cable uses 2 x ST male connectors on one end and 2 x LC male connectors on the other, matching standard OM1 patch-panel ports.

How can I verify the 1 m link is performing correctly after installation?

Check that the orange LSZH jacket is intact, connectors are fully seated, and run a 1 Gb Ethernet test to confirm error-free transmission.

Does the package include any adapters or cleaning tools, or must I buy them separately?

The box contains only the 3.28 ft duplex patch cable with molded ST and LC ends; adapters, cleaning kits, and mounting hardware are sold separately.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.