We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Aqua duplex fiber cable with MPO connectors on both ends, 16.4 ft long

AddOn

AddOn ADD-MPOMPO-5M5OM4 16.4 ft MPO/MPO OM4 12 Fiber network ethernet cable

SKU CH-PVTG-KFAXZ MPN ADD-MPOMPO-5M5OM4

A 16.4 ft aqua duplex patch cable with MPO connectors on both ends for 12-fiber OM4 multimode links

  • TypeDuplex
  • Connector AMPO
  • Connector BMPO
  • Length16.4 ft.
  • ColorAqua
  • FeaturesIt is a 12-colored 0.9mm cable utilizing a male (with pins)
  • 4 ft length suits rack-to-rack runs
  • Aqua jacket identifies OM4 multimode at a glance
  • 12-fiber MPO connectors enable 40Gig breakout links
  • Duplex construction supports bidirectional data flow
  • 100% optically tested for insertion loss before shipment

MPO/MPO OM4 Duplex Patch Cable

This 16.4 ft aqua cable uses male MPO connectors on both ends for duplex fibre links. It is built with 12 coloured 0.9 mm fibres rated for OM4 multi-mode performance. Each assembly is 100 percent optically tested for insertion loss before shipment. The duplex design supports standard transmit and receive channel pairs.

Suits 40Gig breakout modules

Installers who need a pre-terminated MPO-to-MPO link for plug-and-play cassette modules will use this cable. Buyers who require LC, SC or other connector types on either end cannot use this assembly. It also does not serve single-mode or OM3-only infrastructure.

12-fibre OM4 multi-mode construction

The cable contains 12 fibres with a 50/125 micron core/cladding diameter built to OM4 specifications. This fibre count and grade determine compatibility with 40Gig parallel optics and high-bandwidth multi-mode runs.

Highlights

  • 4 ft length suits rack-to-rack runs
  • Aqua jacket identifies OM4 multimode at a glance
  • 12-fiber MPO connectors enable 40Gig breakout links
  • Duplex construction supports bidirectional data flow
  • 100% optically tested for insertion loss before shipment

Specifications

BrandAddOn
ModelADD-MPOMPO-5M5OM4
TypeDuplex
Connector AMPO
Connector BMPO
Length16.4 ft.
ColorAqua
FeaturesIt is a 12-colored 0.9mm cable utilizing a male (with pins) MPO connector on one end and 12 male 50/125 multi-mode OM3 LC connectors on the other end. This 40Gig breakout cable is used primarily inside plug-and-play cassette modules. Our patch cables are 100% compliant for all of your networking needs. They provide higher speeds and increased bandwidth, compared to conventional twisted-pair copper cable. Each cable is 100% optically tested for insertion loss before you take ownership. Now you have a cost effective solution to your network upgrade needs.
Shipping weight0.18 kg
Package size330 × 279 × 51 mm

Questions about this item

Does the 16.4 ft aqua duplex cable generate any heat or noise when carrying 40Gig traffic all day?

The passive fiber assembly has no active components, so it produces no heat or audible noise regardless of how long it runs at 40Gig speeds.

What equipment must I already have to use the male MPO connectors with pins on this 12-fiber patch cable?

You need cassette modules or patch panels with female MPO ports that accept pinned connectors, plus 50/125 multi-mode OM3 LC interfaces for the breakout side.

Will this 2017-vintage OM4 aqua cable work alongside older OM3 50/125 multi-mode links in the same rack?

Yes, the OM4 cable is fully backward-compatible with existing OM3 50/125 multi-mode infrastructure and will interoperate at the lower OM3 bandwidth.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.