We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Orange simplex fibre patch cable with LC connectors at both ends, 29.53 ft long

AddOn

AddOn ADD-LC-LC-9M9SMF 29.53 ft Simplex LC/LC Orange network ethernet cable

SKU CH-BQVA-J0CDE MPN ADD-LC-LC-9M9SMF

A simplex single-mode fibre patch cable with LC connectors, 29.53 ft long, designed for 10Gb Ethernet links

  • TypeSimplex
  • Connector ALC (Male)
  • Connector BLC (Male)
  • Length29.53 ft.
  • ColorOrange
  • FeaturesThis high quality SMF (9/125) patch cable is specifically de
  • Simplex single-mode fiber carries 10 Gb signals over 29.53 ft
  • LC male connectors on both ends plug straight into patch panels or switches
  • Orange LSZH jacket resists toxic smoke and meets plenum fire ratings
  • 9/125 µm core tested for 100 % insertion loss before shipment
  • Injection-moulded strain relief withstands pulls and impacts during installation

Single-mode fibre patch cable for 10 Gb Ethernet

This 29.53 ft simplex cable uses LC male connectors on both ends and an orange LSZH jacket. It is built for Ethernet, multimedia or communication links that require single-mode 9/125 fibre. The construction suits LAN or SAN connections between patch panels, switches, media converters and routers. Each assembly is 100 % optically tested for insertion loss before shipment.

Distance and bandwidth limits of single-mode fibre

Single-mode 9/125 fibre supports 10 Gb speeds over far longer runs than multimode or copper alternatives. The practical reach depends on the transceiver optics and link budget, not on the cable alone. Attenuation and connector loss must stay within the receiver sensitivity of the active equipment. The LSZH jacket allows installation in plenum spaces and poorly ventilated areas without conduit.

Replaces copper patch leads for high-speed

The jump is worth it when 10 Gb Ethernet or storage traffic must travel beyond the 100 m limit of twisted-pair copper. It also upgrades older multimode fibre runs that cannot meet the bandwidth or distance needed for current 10 Gb optics. Buyers who need duplex connectivity or a different connector type should select a matching duplex or hybrid assembly instead.

Highlights

  • Simplex single-mode fiber carries 10 Gb signals over 29.53 ft
  • LC male connectors on both ends plug straight into patch panels or switches
  • Orange LSZH jacket resists toxic smoke and meets plenum fire ratings
  • 9/125 µm core tested for 100 % insertion loss before shipment
  • Injection-moulded strain relief withstands pulls and impacts during installation

Specifications

BrandAddOn
ModelADD-LC-LC-9M9SMF
TypeSimplex
Connector ALC (Male)
Connector BLC (Male)
Length29.53 ft.
ColorOrange
FeaturesThis high quality SMF (9/125) patch cable is specifically designed for ethernet, multimedia, or communication applications, and is intended for use with 10Gb applications. This patch cable is suited for LANs or SANs, and is recommended for connection between fiber patch panels, hubs, switches, media converters and routers, etc. The low smoke zero halogen (LSZH) jacket protects from toxic and corrosive gases in badly ventilated spaces and other areas where it is most crucial. It also provides the fire protection needed to run within walls and air plenums eliminating the need for condu
Shipping weight0.18 kg
Package size330 × 279 × 51 mm

Questions about this item

Simplex or duplex — which version do I need for a single 10Gb link?

This cable is Simplex with one fiber strand; it carries one 10Gb channel. Choose duplex if your equipment requires two strands for transmit and receive.

What does the 10Gb rating mean when the cable is installed?

The 9/125 single-mode fiber supports 10Gb Ethernet over the full 29.53 ft length with tested insertion loss.

Is the LC connector compatible with standard SFP+ transceivers?

Yes, both ends use LC (Male) connectors that mate with common SFP+ and SFP modules in switches and routers.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.