We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Aqua duplex fibre patch cable with LC male connectors on both ends, 6.6 ft long

AddOn

AddOn 11792018 fibre optic cable LC multi-mode male to LC multi-mode male 6.6 ft

SKU CH-PMY8-YB6F0 MPN 11792018

A 6.6 ft aqua duplex riser-rated OM3 fibre patch cable with LC male connectors on both ends, supporting 10 Gigabit Ethernet up to 300 metres and 40 or 100 Gigabit Ethernet up to 100 metres

  • Supports 10 GbE up to 300 m with OM3 50 µm core
  • Handles 40/100 GbE links up to 100 m over duplex OM3
  • OFNR riser rating approved for in-building vertical runs
  • Duplex LC male connectors enable simultaneous transmit and receive
  • HP AJ835A compatible design guaranteed not to void OEM warranties

LC Multi-mode Duplex Patch Cable

This 6.6 ft OM3 fibre patch cable uses LC male connectors on both ends. The aqua jacket identifies the multi-mode rating and the OFNR riser classification suits indoor vertical runs. It is built for 10 Gigabit Ethernet links up to 300 metres and 40 or 100 Gigabit Ethernet up to 100 metres. The cable is fully compliant with HP AJ835A specifications.

Installers Needing Indoor Riser Links

The duplex construction pairs transmit and receive fibres for standard transceiver pairs. Builders who need outdoor, plenum or single-mode cable should select a different jacket rating. The fixed 6.6 ft length will not suit runs that require longer or shorter pre-terminated assemblies.

OM3 50-Micron Core Specification

The 50 micron core size determines the supported bandwidth and distance limits. Matching this core to the transceiver module ensures the rated 10, 40 and 100 Gigabit performance. A mismatched core diameter will cause excessive loss and link failure.

Highlights

  • Supports 10 GbE up to 300 m with OM3 50 µm core
  • Handles 40/100 GbE links up to 100 m over duplex OM3
  • OFNR riser rating approved for in-building vertical runs
  • Duplex LC male connectors enable simultaneous transmit and receive
  • HP AJ835A compatible design guaranteed not to void OEM warranties

Specifications

No published specifications for this item yet.

Questions about this item

What transceiver modules do I need for the LC connectors on this AddOn 11792018 cable?

You need SFP+ or QSFP+ transceivers with LC duplex interfaces that operate on OM3 multi-mode fibre for 10, 40 or 100 Gigabit Ethernet links.

Will this OM3 patch cable work with my existing OM1 or OM2 cabling?

It can connect to OM1 or OM2 links, but the channel will be limited to the lower bandwidth and distance of the older fibre grade.

How can I verify the cable is performing correctly after installation?

Check the link LED on the connected transceivers and confirm the negotiated speed matches the expected 10, 40 or 100 Gigabit rate.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.