AddOn
AddOn 11630148 2m SC male to ST male yellow duplex riser fibre optic cable
A 2 m yellow duplex riser-rated single-mode fibre patch cable with SC and ST male connectors for indoor networking
- TypeNetwork Cable
- ColorYellow
- Length6.56 ft
- Connector Number1
- Connector Detail1 x ST Male Network
- OS2 single-mode for 1310 nm and 1550 nm wavelengths
- Riser-rated OFNR jacket for indoor vertical runs
- Duplex two-strand design supports simultaneous transmit and receive
- SC male to ST male connectors for direct equipment linking
- 2 m (6.56 ft) length fits standard rack spacing
2 m SC-to-ST single-mode patch cable
This 2 metre yellow duplex cable carries single-mode OS2 fibre terminated with SC male and ST male connectors. It is rated OFNR for riser installation in vertical building pathways. The 9/125 micron core supports 1310 nm and 1550 nm wavelengths for campus and data-centre links.
Passive fibre with no power or cooling needs
The cable draws no electricity, generates no heat and produces no audible noise. Its non-conductive glass construction eliminates ground-loop risk between connected equipment. Riser-rated jacketing meets fire-safety requirements for between-floor runs without additional conduit.
Duplex link for transceiver pairs
Each end presents one SC male and one ST male connector, matching transceivers that transmit and receive on separate strands. The 6.56 ft length suits rack-to-patch-panel or cross-connect distances in standard cabinets. ISO/IEC 11801 compliance ensures interoperability with compliant networking gear.
Highlights
- OS2 single-mode for 1310 nm and 1550 nm wavelengths
- Riser-rated OFNR jacket for indoor vertical runs
- Duplex two-strand design supports simultaneous transmit and receive
- SC male to ST male connectors for direct equipment linking
- 2 m (6.56 ft) length fits standard rack spacing
Specifications
| Brand | AddOn |
|---|---|
| Type | Network Cable |
| Color | Yellow |
| Length | 6.56 ft |
| Connector Number | 1 |
| Connector Detail | 1 x ST Male Network |
| Shipping weight | 0.91 kg |
| Package size | 203 × 178 × 51 mm |
Questions about this item
How do I install the SC and ST connectors on the 11630148 patch cable?
Push each connector straight into its mating adapter until the latch clicks or the bayonet locks; the step people miss is cleaning both end-faces with a lint-free wipe and isopropyl alcohol before mating to avoid contaminating the 9/125 µm core.
What maintenance will the 2m yellow duplex riser cable need later?
Inspect end-faces with a fibre scope before every reconnect, clean with a one-click cleaner if contaminated, and replace the patch cord if insertion loss exceeds the 1 dB/km OS2 budget for the 6.56 ft run.
What limit appears first on the OS2 single-mode link under sustained use?
The 1 dB/km attenuation ceiling at 1310 nm or 1550 nm is the first physical limit; on a 6.56 ft span it translates to a fraction of a decibel, so connector cleanliness dominates real-world loss.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



