We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Three thin blue SATA cables with straight locking connectors

ADCAUDX DC-0052 SATA cable 12 inch 3 pack blue

SKU CH-Z364-04KDZ

Three 12-inch SATA 6Gbps cables with locking latches connect SSDs, HDDs and optical drives in tight spaces

  • TypeSATA Cables
  • ColorBlue
  • Length12
  • Connector DetailSata 7 Pin
  • Speed6 gigabits_per_second
  • Conductortin
  • Three 12-inch SATA III cables at 6 Gbps for multi-drive expansion
  • Thin 30 AWG flexible blue cables simplify routing in tight cases
  • Locking 7-pin latches keep data links secure under vibration
  • Labelled P1–P3 ends speed up RAID or multi-bay setup
  • Backwards compatible with SATA I and II drives for legacy support

Three-pack 12-inch SATA III cables

This pack contains three blue SATA III data cables, each 12 inches long. They connect motherboards or host controllers to SATA SSDs, hard drives, or optical drives. The cables carry data only and do not supply power to the attached drive.

Sustained 6 Gbps transfer with locking latch

Each cable supports up to 6 Gbps data rates and is backward compatible with SATA I and II devices. The 30 AWG tin conductors and locking latch on every 7-pin connector maintain a stable signal during continuous read and write workloads. Labels P1 to P3 help identify cables in multi-drive or RAID setups.

SATA interface practical limits

The SATA 6 Gbps ceiling is shared by all drives on the same controller, so aggregate throughput cannot exceed the bus maximum. Cable length is fixed at 12 inches, restricting routing to short internal runs. Drives requiring a separate power connection must be powered independently.

Highlights

  • Three 12-inch SATA III cables at 6 Gbps for multi-drive expansion
  • Thin 30 AWG flexible blue cables simplify routing in tight cases
  • Locking 7-pin latches keep data links secure under vibration
  • Labelled P1–P3 ends speed up RAID or multi-bay setup
  • Backwards compatible with SATA I and II drives for legacy support

Specifications

BrandADCAUDX
ModelDC-0052
TypeSATA Cables
ColorBlue
Length12
Connector DetailSata 7 Pin
Speed6 gigabits_per_second
Conductortin
FeaturesData Transfer

Questions about this item

Do these thin 30 AWG SATA cables generate noticeable heat or draw extra power during continuous all-day operation?

The cables are passive 6 Gbps data links with tin conductors; they carry only signalling current and add no measurable heat or power draw to a running system.

What separate component must already be installed so the connected drive receives power?

Each drive needs its own SATA power connector from the PSU because the 7-pin data cable supplies no power at all.

Will the 12-inch blue cables work reliably with an older SATA I hard drive kept in the same build?

Yes, they are backwards compatible with SATA I and SATA II drives, and the 6 Gbps rating simply caps at the drive's own maximum speed.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.