We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Five short blue SATA cables with straight locking connectors

ADCAUDX DC-0050 SATA cable 5-pack 8 inch straight 6 Gbps

SKU CH-TGCX-9HF2V

Five 8-inch straight SATA III cables with locking latches, rated 6 Gbps and built from 30 AWG tin conductor with foil shielding for internal drives

  • TypeSATA Cables
  • ColorBlack/Blue
  • Length8
  • Connector DetailSata 7pin
  • Speed6 gigabits_per_second
  • Conductortin
  • Five cables for spare or replacement connections
  • 6 Gbps data rate with SATA I and II backward compatibility
  • 8 inch thin profile fits tight spaces and server cases
  • Locking latch on each connector prevents accidental disconnects
  • Tin conductor and aluminium foil shielding for stable signal transfer

ADCAUDX DC-0050 SATA III 5-pack

This five-pack of SATA III data cables connects internal hard drives, SSDs and optical drives to motherboards or host controllers. Each 8-inch straight cable carries a 6 Gbps rating and is backward compatible with SATA I and II devices. The slim 30 AWG conductors use tin solder for stable signal transfer. Locking latches on every connector prevent accidental disconnection.

Check your drive power and port clearance

These cables carry data only and do not supply power to the attached drive. Ensure each drive has a separate power connection from the PSU before ordering. Verify that the straight 7-pin connectors fit the available headers on your board, especially in dense server or RAID layouts where adjacent ports may be tightly spaced. The .2 m length suits short runs inside compact chassis.

Replaces worn or missing SATA 6 Gbps cables

Use this pack to swap out damaged cables or to add drives when the original cables are too long and obstruct airflow. The labelled P1–P5 cables simplify routing in multi-drive or RAID configurations. The upgrade is worth it when existing cables limit signal integrity at 6 Gbps or when cable bulk hampers maintenance in tight 2.5 or 3.5 inch drive bays.

Highlights

  • Five cables for spare or replacement connections
  • 6 Gbps data rate with SATA I and II backward compatibility
  • 8 inch thin profile fits tight spaces and server cases
  • Locking latch on each connector prevents accidental disconnects
  • Tin conductor and aluminium foil shielding for stable signal transfer

Specifications

BrandADCAUDX
ModelDC-0050
TypeSATA Cables
ColorBlack/Blue
Length8
Connector DetailSata 7pin
Speed6 gigabits_per_second
Conductortin
FeaturesData Transfer

Questions about this item

What comes in the pack and do I need anything else?

The pack contains five straight 7-pin SATA data cables, each 8 inches long. They carry data only, so a separate SATA power cable or adapter is required for every drive you connect.

How do I choose among the five cables in the pack?

All five cables are identical 6 Gbps SATA III data cables labeled P1 to P5 for routing convenience; pick any cable for any SATA SSD, HDD or optical drive.

What does the 6 Gbps rating mean once the cable is installed?

The cable supports up to 6 Gbps SATA III speeds and is backwards compatible with SATA I and II drives; actual transfer rate is limited by the drive and controller you attach.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.