We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Three blue 3.3 ft SATA cables with locking latches

ADCAUDX DC-0045 3 Pack SATA 6Gbps Cable 3.3Ft Blue

SKU CH-ZMVG-N7BJS

Three blue SATA 6Gbps data cables, each 3.3 ft long with locking latches, connect drives to motherboards for 6 Gb/s transfer

  • TypeSATA
  • ColorBlue
  • Length3.3
  • Connector DetailSata 7 Pin
  • Terminal GenderFemale-to-Female
  • Speed6 gigabits_per_second
  • Three-metre reach lets you route cables cleanly behind motherboard trays
  • 6 Gbps SATA III bandwidth keeps SSD and HDD transfers at full speed
  • Locking latch on every connector prevents accidental disconnects under vibration
  • Thin 30 AWG conductors improve airflow in tight server chassis
  • Three colour-coded cables simplify RAID or multi-drive identification

Three-cable SATA 6Gbps kit

This pack contains three blue SATA III data cables, each 3.3 feet long, designed to link motherboards or host controllers to hard drives, SSDs, optical drives or RAID controllers. The cables carry data only and do not supply power, so each drive must be powered separately. They are suited for builders adding multiple drives to a server, workstation or desktop where extra length helps routing. Buyers who need combined data-and-power cables or single-cable purchases will not find those here.

Thermals noise and power draw

The cables are passive copper conductors with 30 AWG gauge and generate no heat, noise or power draw of their own. They simply transmit signals between the host and the attached storage device. Because they draw no power, they do not affect system thermals or fan behaviour. Installers should still allow airflow around the cable runs, but the cables themselves add no thermal load.

Locking latch and labelled ends

Each connector features a locking latch that secures the connection against vibration or accidental disconnection during drive swaps. The three cables are marked P1, P2 and P3 to simplify routing in multi-drive arrays or RAID setups. No driver or software installation is required; the cables work immediately when plugged into any standard SATA 7-pin port.

Highlights

  • Three-metre reach lets you route cables cleanly behind motherboard trays
  • 6 Gbps SATA III bandwidth keeps SSD and HDD transfers at full speed
  • Locking latch on every connector prevents accidental disconnects under vibration
  • Thin 30 AWG conductors improve airflow in tight server chassis
  • Three colour-coded cables simplify RAID or multi-drive identification

Specifications

BrandADCAUDX
ModelDC-0045
TypeSATA
ColorBlue
Length3.3
Connector DetailSata 7 Pin
Terminal GenderFemale-to-Female
Speed6 gigabits_per_second
ConductorCopper
FeaturesData Transfer

Questions about this item

How do I install the DC-0045 cable and which step is often missed?

Align the 7-pin female connector with the motherboard or controller port, press straight in until the locking latch clicks, then verify the latch is fully engaged — the click is the step many skip.

What maintenance or replacement will the DC-0045 cable need later?

No scheduled maintenance; inspect the latch and 30 AWG conductors during hardware changes and replace any cable with a damaged latch or kinked jacket.

What limit appears first on the DC-0045 cable under sustained use?

The 6 Gbps SATA interface caps throughput, so sustained transfers cannot exceed that rate regardless of cable length or 30 AWG construction.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.