We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black right-angle Mini-SAS HD SFF-8643 to four SATA fan-out cable 0.8m

Adaptec

Adaptec 2280000-R server accessory Mini-SAS HD SFF-8643 to 4 SATA fan-out cable 0.8m

SKU CH-SR5F-NVBMW MPN 2280000-R

An internal right-angle Mini-SAS HD SFF-8643 to four SATA fan-out cable measuring 0.8 metres with sideband signals for Series 7/7Q adapters

  • TypeCable
  • ColorBlack
  • SpecificationsCable Length: 0.8m Adaptec 6Gb/s SAS HD Cables for Series 7/
  • FeaturesThe Adaptec ACK-I-rA-HDmSAS-4SATA-SB-.8M is an internal "rig
  • Right-angle connector eases tight server installs
  • 8 m length fits standard chassis routing
  • Mini-SAS HD SFF-8643 to four SATA fan-out
  • Sideband signals SFF-8448 support drive monitoring
  • Compatible with Adaptec Series 7, 7Q, 7H and 7He adapters

Adaptec Series 7/7Q fan-out cable

The Adaptec 2280000-R is an internal right-angle Mini-SAS HD x4 (SFF-8643) to four SATA fan-out cable measuring 0.8 metres. It connects a compatible Series 7, 7Q, 7H or 7He adapter to SATA hard drives or a SAS/SATA backplane. Sideband signals are carried via the SFF-8448 specification. The black cable is sold new.

Suits direct SATA drive attachment

Builders wiring SATA disks or a backplane directly to a Series 7/7Q controller will find the right-angle connector useful in tight server chassis. Buyers who need a straight connector or a different cable length should look at something else. Anyone whose controller uses a different Mini-SAS interface cannot use this cable.

SFF-8643 to four SATA with sideband

The single specification that decides fit is the SFF-8643 Mini-SAS HD x4 connector on one end breaking out to four SATA connectors with sideband support on the other. Verify the controller port matches SFF-8643 before purchase.

Highlights

  • Right-angle connector eases tight server installs
  • 8 m length fits standard chassis routing
  • Mini-SAS HD SFF-8643 to four SATA fan-out
  • Sideband signals SFF-8448 support drive monitoring
  • Compatible with Adaptec Series 7, 7Q, 7H and 7He adapters

Specifications

BrandAdaptec
Model2280000-R
TypeCable
ColorBlack
SpecificationsCable Length: 0.8m
Adaptec 6Gb/s SAS HD Cables for Series 7/7Q Adapters
FeaturesThe Adaptec ACK-I-rA-HDmSAS-4SATA-SB-.8M is an internal "right angle" Mini Serial Attached SCSI HD x4 (SFF-8643) to (4) x1 Serial ATA (adapter based) fan-out cable with sideband signals (SFF-8448).
It measures 0.8 meters and is used for connecting a SAS/SATA adapter to SATA disks, or a SAS/SATA backplane.
Shipping weight0.06 kg
Package size300 × 188 × 25 mm

Questions about this item

Will the right-angled SFF-8643 plug clear the backplane in a 1U chassis?

The 0.8 m cable uses a right-angled Mini-SAS HD connector that sits flush against the adapter, leaving room for the latch in tight 1U spaces.

Which end locks first when I route the four SATA tails to the drive bays?

Seat the SFF-8643 end into the Series 7/7Q adapter until the latch clicks, then dress each SATA connector straight into its drive or backplane port.

How often should I reseat the sideband pins on the SFF-8643 end?

Reseat only if the adapter reports link errors; the SFF-8448 sideband pins are rated for the life of the cable under normal server vibration.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.