ABLEGRID
ABLEGRID White 98ft BNC Extension Cable 1000TVL
Pre-made all-in-one BNC video and power cable cord extends camera connections up to 98ft in white
- Battery TypeUPS
- 98 ft length reaches distant cameras
- BNC video and power combined in one cable
- White colour blends with light surfaces
- 1000 TVL rating supports high-resolution video
- Compatible with Q-See QM9901B bullet cameras
White BNC Extension Cable for Security Cameras
This 98ft white BNC extension cable carries both video and power to compatible bullet cameras. It is built for installers who need a single pre-made run between a recorder and a camera location. The all-in-one design reduces the number of separate wires that must be pulled through walls or conduit.
Practical Limits of Composite Video Over Distance
The cable uses a standard BNC interface for composite video, which degrades with length and electromagnetic interference. At 98ft the signal remains usable for 1000TVL cameras, but longer runs would require active amplification or a different transmission technology. Installers should avoid routing the cable parallel to high-voltage mains wiring.
98ft Length Determines Site Suitability
The fixed 98ft length is the single specification that decides whether this cable fits a given installation. Measure the exact path from the recorder to the camera mount before purchasing; excess cable cannot be shortened without re-terminating the BNC and power connectors. Buyers who need a shorter or longer run must select a different length.
Highlights
- 98 ft length reaches distant cameras
- BNC video and power combined in one cable
- White colour blends with light surfaces
- 1000 TVL rating supports high-resolution video
- Compatible with Q-See QM9901B bullet cameras
Specifications
| Brand | ABLEGRID |
|---|---|
| Battery Type | UPS |
Questions about this item
Should I pick the 98 ft or 100 ft length for my Q-See QM9901B camera?
The cable is 98 ft long; the 100 ft figure appears only in the title, so choose the 98 ft version for this camera.
What does 1000TVL mean once the cable is connected?
1000TVL refers to the camera’s resolution rating; the cable simply carries that video signal without changing it.
What interface does the BNC connector use and what does it limit?
The BNC connector carries analog composite video and DC power, limiting the link to standard-definition signals over 98 ft.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



