We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

AAAwave

AAAwave Triple PSU 24-pin Adapter Cable 30cm 18AWG

SKU CH-GTQ1-KQSGR

Connects three power supplies to one motherboard using 24-pin connectors with 18 AWG wire rated for up to 2000W

  • Connect three PSUs to one motherboard via 24-pin adapter
  • 18 AWG oxygen-free copper wire supports up to 2000W
  • 30 cm length fits compact mining or gaming builds
  • Powers all three PSUs simultaneously with single on/off signal
  • Compatible with both 24-pin and 20-pin ATX motherboards

Triple PSU Adapter for Mining & High-Power Builds

This adapter cable connects three separate power supply units to a single motherboard 24-pin socket. It is intended for mining rigs or multi-GPU systems where total system draw exceeds what one PSU can safely deliver. The cable accepts both 24-pin and 20-pin ATX motherboards.

Simple Daisy-Chain Install with 30 cm Reach

Plug the male 24-pin connector into the motherboard and attach each PSU to one of the three female 24-pin sockets. The 30 cm length suits tight server chassis or open mining frames. Ensure every PSU is switched on before powering the system; the adapter passes the PS_ON signal to all three units simultaneously so they start together.

Verify PSU Wattage and 24-Pin Compatibility

Confirm each power supply provides a standard 24-pin ATX output and that combined output stays below the 2000 W rating marked on the cable. The 18 AWG oxygen-free copper conductors are sized for that limit. Do not use this adapter if any PSU lacks a 24-pin connector or if total load could exceed the stated maximum.

Highlights

  • Connect three PSUs to one motherboard via 24-pin adapter
  • 18 AWG oxygen-free copper wire supports up to 2000W
  • 30 cm length fits compact mining or gaming builds
  • Powers all three PSUs simultaneously with single on/off signal
  • Compatible with both 24-pin and 20-pin ATX motherboards

Specifications

No published specifications for this item yet.

Questions about this item

How can I confirm the adapter is powering all three PSUs simultaneously after connecting it?

The cable powers all connected PSUs on and off together, so a single press of the motherboard power button should start every unit at once.

What connectors and cables are included, and is anything else required to run three PSUs?

The package contains the 30 cm adapter with one 24-pin male plug for the motherboard and three 24-pin female sockets for the PSUs; each power supply still needs its own AC power cord.

Which version of this adapter should I choose for a mining rig drawing up to 2000 W?

This single 18 AWG model is rated for loads under 2000 W and fits both 24-pin and 20-pin ATX motherboards, so it covers the stated requirement.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.