We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Pack of 12 PCIe 1x to 16x riser boards with 60cm USB 3.0 cables and 10 capacitors

AAAwave

AAAwave PCIe Riser VER 011 Pro 1x to 16x 60cm USB 3.0 10 Capacitors 2x 6PIN Pack 12

SKU CH-6F80-HEYJE

Pack of twelve PCIe 1x to 16x risers with 60 cm USB 3.0 cables, ten solid capacitors and dual 6-pin power for stable GPU mining

Style 12-Pack

  • Stable GPU power from 10 solid capacitors
  • 60 cm USB 3.0 cable with shield net for clean routing
  • Version 11 Pro design built for mining rigs
  • Dual 6-pin connectors reduce motherboard load
  • Works with Windows, Linux and Mac systems

PCIe 1x to 16x riser kit

This pack of twelve riser cards converts a single PCIe lane into a full-length x16 slot for graphics cards. Each unit includes a 60 cm USB 3.0 cable with shielded wiring and ten solid capacitors for stable power delivery. The kit targets miners and builders who need to space multiple GPUs away from the motherboard.

Replaces short factory ribbons

Standard flat flex cables limit GPU placement and can degrade signals over distance. These risers use multi-layer shielded wire that maintains signal integrity up to three metres, letting you mount cards in open frames or large chassis. The upgrade is worth it when you run several cards and need reliable long-reach connections.

Fits open mining frames

Each riser draws auxiliary power through two 6-pin connectors, moving load off the motherboard slot. The soft 60 cm cable routes easily around frame struts and power supplies. You will need a motherboard with a free PCIe slot and a power supply with enough 6-pin leads for every card in the rig.

Highlights

  • Stable GPU power from 10 solid capacitors
  • 60 cm USB 3.0 cable with shield net for clean routing
  • Version 11 Pro design built for mining rigs
  • Dual 6-pin connectors reduce motherboard load
  • Works with Windows, Linux and Mac systems

Specifications

BrandAAAwave
ModelAAAPCI11PROX12

Other versions of this model

4 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What motherboard slot and power connector does each riser require?

Each riser plugs into a PCI-E 1x slot on the motherboard and draws auxiliary power through two 6 PIN connectors on the adapter board.

Which insertion step do builders most often reverse on the VER 011 Pro?

The PCIe connector must go into the motherboard slot before the 6 PIN power leads are attached; powering the riser first can damage the board.

When should the 10 solid capacitors on a riser be inspected or the unit replaced?

Check the capacitors for bulging or leakage after extended mining loads; replace the riser if any capacitor shows physical deformation.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.