We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four braided Y-cables each with one 6-pin female and two 6+2-pin male ends

AAAwave

AAAwave PCIe 6-pin female to dual 6+2-pin male splitter 23 cm 4-pack

SKU CH-9XF0-VE8A7

Adds two 6+2-pin PCIe power connectors from one 6-pin PSU output, 23 cm each, 18 AWG, four-pack

Option Pack of 4

  • Adds two PCIe power connectors from one 6-pin source
  • 18 AWG copper wire handles high current without overheating
  • 23 cm length fits tidy cable routing in most cases
  • 6+2 pin ends work as 6-pin or 8-pin GPU plugs
  • Pack of four splitters for multi-GPU or spare builds

Four-pack 6-pin to dual 6+2-pin GPU power splitter

This four-pack of AAAwave cables converts one 6-pin PCIe female connector into two 6+2-pin male ends. Each 23 cm lead uses 18 AWG tin-coated copper wire under braided sleeving. The set is aimed at builders who need extra GPU power connectors without replacing the power supply. It suits systems where the PSU lacks enough native 8-pin outputs for the installed graphics card.

18 AWG conductors and 23 cm reach

The 1007-18AWG gauge handles typical mid-range GPU loads without excessive voltage drop. Each splitter adds two 6+2-pin plugs that slide to work as either 6-pin or 8-pin connectors. Total length is 23 cm from the female end to the split, so routing stays tidy in standard ATX cases. Very high-draw cards or multi-GPU arrays may exceed the safe current capacity of a single 6-pin source.

6-pin female input requirement

Your power supply must provide a free 6-pin PCIe output to use these splitters. Units with only 8-pin or 12VHPWR outputs cannot connect directly. The cables are compatible with Radeon and other graphics cards that accept 6-pin or 8-pin PCIe power. Builders whose PSU lacks a spare 6-pin port will need a different adapter or a PSU upgrade.

Highlights

  • Adds two PCIe power connectors from one 6-pin source
  • 18 AWG copper wire handles high current without overheating
  • 23 cm length fits tidy cable routing in most cases
  • 6+2 pin ends work as 6-pin or 8-pin GPU plugs
  • Pack of four splitters for multi-GPU or spare builds

Specifications

No published specifications for this item yet.

Other versions of this model

3 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will the 23 cm splitter reach from my PSU's 6-pin port to a graphics card mounted in a lower PCIe slot?

The cable is 23 cm long, giving enough slack for most mid-tower layouts while keeping excess length minimal.

How can I confirm the 18 AWG wires are delivering stable power to my Radeon GPU after installation?

Check that both 6+2-pin connectors seat firmly, then monitor GPU core voltage and temperature under load for steady readings.

Does the 4-pack include cable ties or extra sleeving for routing the four splitters cleanly?

Each splitter comes with its own braided sleeve; no separate ties or additional sleeving are included.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.