We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Six black braided cables each with one 6-pin female and two 6+2-pin male connectors

AAAwave

AAAwave PCIe 6-Pin Female to Dual 6+2-Pin Male Braided Splitter Cable 9-Inch 18AWG Pack of 6

SKU CH-6CA0-HYDMD

Six-pack of 9-inch 18AWG braided cables splits one 6-pin PSU connector into two 6+2-pin GPU plugs

Option Pack of 6

  • Adds two PCIe power connectors from one 6-pin supply lead
  • 9-inch 18AWG braided cable carries high current with low heat
  • Each 6+2-pin end works as either 6-pin or 8-pin GPU plug
  • Phosphor-copper terminals resist wear and stay firmly seated
  • Pack of six cables supports multiple graphics-card upgrades

Purpose and fit

This splitter cable adds two PCIe power connectors from a single 6-pin supply output. It suits builders whose PSU lacks enough native leads for a graphics card that requires dual 6-pin or 8-pin inputs. The pack of six covers multi-GPU rigs or spare cables for future upgrades. Buyers whose power supply already provides sufficient native connectors will not need this adapter.

Build and daily use

Each lead uses 18 AWG tin-coated copper wire inside a braided sleeve that resists abrasion and keeps the loom tidy. Phosphor-bronze terminals give a firm, repeatable fit and the 6+2 pin ends slide apart so either 6-pin or 8-pin sockets accept them without force. The 9-inch length reaches nearby GPU sockets without excess slack that would block airflow. Installers who need longer reach or right-angle plugs must look elsewhere.

Deciding specification

The cable is rated at 18 AWG (UL 1007) for the current draw of modern graphics cards. If your GPU demands a heavier gauge or your PSU rails are already near their limit, this splitter cannot compensate.

Highlights

  • Adds two PCIe power connectors from one 6-pin supply lead
  • 9-inch 18AWG braided cable carries high current with low heat
  • Each 6+2-pin end works as either 6-pin or 8-pin GPU plug
  • Phosphor-copper terminals resist wear and stay firmly seated
  • Pack of six cables supports multiple graphics-card upgrades

Specifications

No published specifications for this item yet.

Other versions of this model

3 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What does the 18AWG 1007 wire gauge cap in practice for this splitter?

The 18AWG 1007 copper conductors handle the current a dual 6+2-pin GPU draw requires without overheating.

What clearance does the 9-inch 23cm braided Y-cable need to fit?

Allow roughly 23 cm from your PSU 6-pin port to each GPU connector plus room for the braided sleeve.

How is the 6-pin female to dual 6+2-pin male splitter installed, and what step gets missed?

Plug the 6-pin female into the PSU, snap each 6+2-pin male onto the GPU, and slide the 2-pin section off if your card only needs 6 pins.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.