A-Tech
A-Tech Supermicro Certified 8GB DDR3L 1333MHz 2Rx4 ECC RDIMM 240-Pin Server Memory
An 8GB DDR3L 1333MHz registered ECC module certified for Supermicro servers
- Capacity8GB
- SpeedDDR3L 1333 (PC3L 10600)
- CAS LatencyCL9
- Voltage1.35V
- ECCYes
- Buffered/RegisteredRegistered
- Supermicro certified for guaranteed server compatibility
- DDR3L 1333 MHz at 1.35V for lower power draw
- ECC registered 2Rx4 design protects data integrity
- Hynix HMT31GR7CFR4A-H9 chips tested for dependable operation
- 240-pin RDIMM form factor fits standard server slots
Supermicro Certified 8GB DDR3L Server Memory
This module is an 8GB DDR3L 1333MHz 2Rx4 ECC RDIMM built to Supermicro MEM-DR380L-HL05-ER13 specifications. It uses Hynix chips and runs at 1.35V low voltage for registered server platforms.
Check DDR3L 240-pin RDIMM support and 1.35V voltage
Verify your motherboard accepts DDR3L registered ECC memory at 1333MHz with a 2Rx4 rank configuration. Confirm the 240-pin RDIMM form factor matches your available slots before ordering.
Suits Supermicro servers needing certified
Ideal for admins expanding capacity in qualified Supermicro systems that require 1.35V DDR3L registered modules. Not for desktop boards lacking ECC RDIMM support or systems limited to standard 1.5V DDR3.
Highlights
- Supermicro certified for guaranteed server compatibility
- DDR3L 1333 MHz at 1.35V for lower power draw
- ECC registered 2Rx4 design protects data integrity
- Hynix HMT31GR7CFR4A-H9 chips tested for dependable operation
- 240-pin RDIMM form factor fits standard server slots
Specifications
| Brand | SuperMicro |
|---|---|
| Series | Supermicro Certified |
| Model | MEM-DR380L-HL05-ER13 |
| Capacity | 8GB |
| Speed | DDR3L 1333 (PC3L 10600) |
| CAS Latency | CL9 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major Brand Chipset |
| Features | Supermicro Certified MEM-DR380L-HL05-ER13 (HMT31GR7CFR4A-H9) |
Questions about this item
What comes in the box and does it need any extra parts to install?
The package contains a single 8 GB DDR3L RDIMM module. No additional components are required for installation into a compatible 240-pin server slot.
How do I decide between the 1333 MHz and 10600 speed ratings shown?
Both figures describe the same module. 1333 MHz is the clock frequency and PC3-10600 is the corresponding peak bandwidth rating; choose the one your server documentation references.
What does the 1.35 V DDR3L rating mean for power draw and heat in a running server?
The 1.35 V low-voltage design reduces power consumption and thermal output compared with standard 1.5 V DDR3, helping keep dense server configurations cooler under load.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink
Intel HNS2600BPS24R 2U barebone pc dual Xeon DDR4 2.80 TB C622
- Xeon Bronze Xeon Go…
- DDR4-2933/PC4-23466



