We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green bare DDR4 DIMM with black chips, 288 gold pins

A-Tech

A-Tech HMAG68EXNUA076N 8GB DDR4 3200 desktop RAM

SKU CH-RRZJ-9EQRW

An 8 GB DDR4 desktop DIMM running at 3200 MHz with CL22 latency and 1.2 V operation

  • Capacity8GB
  • SpeedDDR4 3200 (PC4 25600)
  • Tested Frequency3200
  • CAS LatencyCL22
  • Voltage1.20V
  • ECCNo
  • 8GB DDR4 3200 capacity for faster multitasking
  • CL22 latency at 1.2V for efficient operation
  • 288-pin DIMM form factor fits desktop slots
  • Non-ECC unbuffered design for standard PC use
  • Tested compatible replacement for Hynix HMAG68EXNUA076N

Compatible Hynix Replacement Module

This 8GB DDR4 3200 DIMM is built as a direct replacement for the Hynix HMAG68EXNUA076N. It suits desktop owners who need a straightforward capacity increase without changing voltage or BIOS settings. The unbuffered, non-ECC design fits standard consumer motherboards that accept 288-pin DDR4 modules.

Upgrade From Lower Speed Or Smaller Kits

The module replaces slower DDR4 sticks or smaller 4GB kits that limit multitasking headroom. A jump to 3200 MT/s at CL22 is worthwhile when the platform supports the PC4-25600 data rate and the board has a free 262-pin DIMM slot. Verify the system's qualified vendor list before installing to avoid mismatched timings.

Steady Operation At Standard Voltage

Running at 1.20V, the stick maintains its rated frequency during extended workloads such as large compiles or virtual-machine hosting. Absence of a heat spreader means airflow across the PCB handles thermal load, so case ventilation should be adequate for sustained throughput. All units pass quality assurance testing before shipment.

Highlights

  • 8GB DDR4 3200 capacity for faster multitasking
  • CL22 latency at 1.2V for efficient operation
  • 288-pin DIMM form factor fits desktop slots
  • Non-ECC unbuffered design for standard PC use
  • Tested compatible replacement for Hynix HMAG68EXNUA076N

Specifications

BrandA-Tech
SeriesCompatible Replacement for Hynix
ModelHMAG68EXNUA076N
Capacity8GB
SpeedDDR4 3200 (PC4 25600)
Tested Frequency3200
CAS LatencyCL22
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor Brand Chipset
Heat SpreaderNo
FeaturesHMAG68EXNUA076N
Recommend UseCompatible Replacement for Hynix HMAG68EXNUA076N

Questions about this item

Will this 8 GB DDR4 3200 module fit a standard desktop DIMM slot?

Yes, it is a 288-pin unbuffered DIMM designed for desktop motherboards that accept DDR4 memory.

Does the CL22 latency at 1.20 V match the JEDEC base speed for DDR4 3200?

Yes, 3200 MT/s with CL22 at 1.20 V is the standard JEDEC profile for this frequency.

Can I add this stick alongside existing DDR4 3200 memory?

It will run at 3200 MT/s CL22; mixing modules of the same speed and voltage usually works, but the system will operate at the slowest module's timings.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.