We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green rectangular circuit board with gold edge contacts and black memory chips, no heat spreader

A-Tech

A-Tech 8GB DDR5 5600MHz CL46 UDIMM 288-Pin 1.1V desktop RAM

SKU CH-4YWC-A6768

8 GB DDR5 module at 5600 MHz with CL46 latency and 1.1 V operation for desktop upgrades

  • Capacity8GB
  • SpeedDDR5 5600 (PC5 44800)
  • Tested Frequency5600
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCNo

Capacity 8GB

Speed DDR5 5600 (PC5 44800)

CAS Latency CL46

  • CL40
  • CL42
  • CL46

Color

Struck-through versions exist but are not stocked here.

  • 8GB capacity expands multitasking headroom for everyday workloads
  • DDR5 5600MHz speed delivers 44800 MT/s data rate for responsive performance
  • CL46 latency at 1.1V balances timing with DDR5 standard voltage
  • 288-pin UDIMM form factor fits desktop DDR5 memory slots
  • Major-brand chips tested for reliable operation in compatible systems

8GB DDR5 5600MHz Module

This A-Tech module delivers 8GB of DDR5 memory at 5600MHz with CL46 latency. It is built for desktop PCs that accept DDR5 DIMM memory and need a straightforward capacity increase. The stick runs at the standard 1.1V voltage for the platform.

288-Pin Unbuffered DIMM Fit

The module uses a 288-pin UDIMM form factor and is unbuffered non-ECC, so it slots directly into consumer desktop boards without registered memory support. Major-brand chips provide the storage array, while the lack of a heat spreader keeps the profile low for tighter CPU cooler clearances. Compatibility spans AMD and Intel platforms that specify DDR5-5600 support.

Sustained Load Behaviour

At the rated 5600MHz and 1.10V the module maintains its CL46 timings during extended workloads rather than only in short bursts. The native DDR5 on-die ECC helps preserve data integrity when the system runs hot for long periods. Quality-assurance testing validates stability across the full operating envelope.

Highlights

  • 8GB capacity expands multitasking headroom for everyday workloads
  • DDR5 5600MHz speed delivers 44800 MT/s data rate for responsive performance
  • CL46 latency at 1.1V balances timing with DDR5 standard voltage
  • 288-pin UDIMM form factor fits desktop DDR5 memory slots
  • Major-brand chips tested for reliable operation in compatible systems

Specifications

BrandA-Tech
SeriesA-Tech DDR5 Desktop Memory RAM
Capacity8GB
SpeedDDR5 5600 (PC5 44800)
Tested Frequency5600
CAS LatencyCL46
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor Brand Chipset
Heat SpreaderNo
FeaturesMajor Brand Chips
Recommend UseAMD & Intel Compatible

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will this module fit my DDR5 motherboard slot?

The stick uses the standard 288-pin DIMM form factor required by desktop DDR5 motherboards.

What BIOS setting ensures it runs at the rated 5600 MT/s?

Enable the board's XMP or EXPO profile; the SPD stores a CL46 5600 profile at 1.1 V.

Can I add this single 8 GB stick to an existing DDR5 kit?

Yes, it is a non-ECC unbuffered module; mixing is possible but matching capacity and timings gives the best stability.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.