We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with black memory chips, gold edge connector, 288 pins

A-Tech

A-Tech 8GB DDR4 3200 Desktop RAM 1Rx16 1.2V

SKU CH-X3E2-8H7C5

8GB DDR4 3200 desktop module, 1Rx16 unbuffered at 1.2V for AMD and Intel systems

  • Capacity8GB
  • SpeedDDR4 3200 (PC4 25600)
  • Tested Frequency3200
  • Voltage1.20V
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • 8GB capacity handles heavier multitasking with ease
  • DDR4 3200 speed moves data at PC4-25600 rates
  • 2V operation keeps power draw low
  • 288-pin DIMM fits standard desktop slots
  • Non-ECC unbuffered design suits consumer motherboards

8GB DDR4 3200 Desktop Module

This 8GB DDR4 module runs at 3200MHz with a 1.20V operating voltage. It is an unbuffered, non-ECC DIMM built for desktop systems needing a straightforward memory increase. The single-rank 1Rx16 organisation keeps the design simple for broad platform compatibility.

Installation notes and common issues

The 288-pin DIMM slots into any standard DDR4 desktop socket without tools or configuration changes. Most problems arise when the motherboard cannot train at the rated 3200 speed and falls back to a lower JEDEC frequency. Mixing this stick with modules of different rank structure or voltage can also prevent the system from posting.

DDR4 practical limits

DDR4 tops out at the 3200 data rate used by this module, so no higher standard speed exists for this generation. The 1.2V baseline leaves little headroom for manual overclocking without raising voltage. Capacity per stick is limited by current density, so larger upgrades require additional slots rather than denser single modules.

Highlights

  • 8GB capacity handles heavier multitasking with ease
  • DDR4 3200 speed moves data at PC4-25600 rates
  • 2V operation keeps power draw low
  • 288-pin DIMM fits standard desktop slots
  • Non-ECC unbuffered design suits consumer motherboards

Specifications

BrandA-Tech
Capacity8GB
SpeedDDR4 3200 (PC4 25600)
Tested Frequency3200
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
Recommend UseAMD & Intel Compatible

Questions about this item

Will this 8 GB DDR4 3200 module work in a desktop that uses a 288-pin DIMM slot?

Yes, the stick is a standard 288-pin DDR4 UDIMM, so it fits any desktop board that accepts DDR4 DIMMs.

Can I add this stick alongside my existing 1.2 V DDR4 memory without voltage conflicts?

The module runs at the standard 1.2 V, matching the voltage of most modern DDR4 kits, so mixing is electrically safe.

Is the 1Rx16 organisation compatible with a motherboard that lists 1Rx8 or 2Rx8 support?

Rank and chip organisation are handled by the memory controller; most current desktop chipsets accept 1Rx16 modules alongside 1Rx8 or 2Rx8 DIMMs.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.