A-Tech 4GB DDR4 2666 ECC SODIMM CL19 1Rx8 1.2V 260-Pin
- 4GB
- 260-Pin DDR4 SO-DIMM
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A-Tech
Dual-channel 8 GB DDR3L ECC SODIMM kit runs at 1600 MHz with CL11 latency at 1.35 V for microservers and NAS
Capacity 8GB (2 x 4GB)
Speed DDR3L 1600 (PC3L 12800)
CAS Latency CL11
This kit provides two 4 GB unbuffered ECC SODIMM modules for laptops, microservers and NAS units that accept DDR3L 1600 memory. Dual-rank organisation and error-correcting code help maintain data integrity in workloads that cannot tolerate silent corruption. The 1.35 V JEDEC low-voltage rating also allows operation at 1.5 V where the platform requires it.
The 204-pin SO-DIMM form factor fits standard DDR3 SODIMM slots without adapters or height clearance issues. A matched pair enables dual-channel bandwidth on compatible controllers, and the absence of a heat spreader keeps the modules thin enough for tight mobile workstation chassis. Installation follows normal SODIMM seating procedure with no special tools required.
Running at 1.35 V reduces power draw and heat output compared with standard 1.5 V DDR3, helping small-form-factor systems stay within thermal limits during sustained loads. Unbuffered ECC adds minimal latency overhead while delivering single-bit error correction and multi-bit detection. The modules operate silently with no active cooling and draw only the power needed for the memory controller.
| Brand | A-Tech |
|---|---|
| Series | A-Tech DDR3 ECC SODIMM |
| Model | A-Tech 4GB 2Rx8 PC3L-12800 ECC SODIMM |
| Part Number | NE-SS-0598 |
| Capacity | 8GB (2 x 4GB) |
| Type | 204-Pin DDR3 SO-DIMM |
| Speed | DDR3L 1600 (PC3L 12800) |
| CAS Latency | CL11 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Dual Channel Kit |
| Heat Spreader | No |
| Features | ECC SODIMM |
| Recommend Use | AMD & Intel Compatible |
| Option | ECC SODIMM |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
Yes, the modules run at DDR3L 1600 (PC3L-12800) with CL11 latency at 1.35V; they are also rated to operate at 1.5V if the platform requires it.
Each 4GB module uses the standard 204-pin DDR3 SO-DIMM form factor, so the laptop or microserver must provide a 204-pin SO-DIMM socket.
Insert both modules into the matching-channel slots (usually same-coloured) until the side clips click; the common mistake is not pressing firmly enough to fully seat the contacts.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?