A-Tech
A-Tech 32GB (4x8GB) DDR3 1066 ECC RDIMM Mac Pro/Xserve memory upgrade
A 32 GB DDR3 1066 ECC registered kit of four 8 GB modules for compatible Mac Pro and Xserve models
- Capacity32GB (4 x 8GB)
- SpeedDDR3 1066 (PC3 8500)
- Voltage1.50V
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor Brand Chipset
- 32 GB kit expands multitasking headroom for demanding workloads
- DDR3 1066 ECC registered design protects data integrity in critical tasks
- Four 8 GB RDIMM modules install directly into 240-pin slots
- Qualified for Mac Pro and Xserve models from 2009 to 2012
- Lifetime warranty and US-based tech support back every module
32GB DDR3 1066 ECC RDIMM kit
This 32GB kit contains four 8GB registered ECC modules that run at DDR3 1066 (PC3-8500) with a 1.50V supply. It is built for Apple Mac Pro models from Early 2009, Mid 2010 and Mid 2012 plus Xserve units from Early 2009. Each module uses a 240-pin RDIMM form factor and major-brand chips.
Sustained-load behaviour
Registered buffering and ECC correction keep data integrity stable when all four channels are fully populated and the system runs continuous workloads. The 2Rx4 organisation spreads access across ranks, helping the memory controller maintain throughput during long compile jobs, virtualisation tasks or large dataset processing.
DDR3 1066 interface limits
The PC3-8500 standard caps peak bandwidth at the rated 1066/1067 MHz clock, so total throughput cannot exceed that ceiling regardless of module count. Builders needing higher memory speeds or greater capacity per slot cannot meet those needs with this DDR3 generation.
Highlights
- 32 GB kit expands multitasking headroom for demanding workloads
- DDR3 1066 ECC registered design protects data integrity in critical tasks
- Four 8 GB RDIMM modules install directly into 240-pin slots
- Qualified for Mac Pro and Xserve models from 2009 to 2012
- Lifetime warranty and US-based tech support back every module
Specifications
| Brand | A-Tech |
|---|---|
| Series | A-Tech DDR3 Apple Mac RAM Memory Upgrades |
| Capacity | 32GB (4 x 8GB) |
| Speed | DDR3 1066 (PC3 8500) |
| Voltage | 1.50V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major Brand Chipset |
| Compatible System | Apple Mac Systems |
| Features | Major Brand Chips |
Questions about this item
How much power does each 8 GB DDR3 1066 ECC RDIMM draw at 1.50 V?
Each module operates at 1.50 V; total kit power depends on system load and the number of populated slots.
Which Mac Pro or Xserve models must I already own for this 4 x 8 GB kit to work?
Compatible systems include Mac Pro Early 2009 4-Core/8-Core, Mid 2010 4-Core/8-Core, Mid 2012 4-Core, and Xserve Early 2009 4-Core/8-Core.
Will these registered ECC DDR3 1066 modules run alongside the original Apple memory in a Mac Pro 4,1?
Yes, the 2Rx4 registered ECC RDIMMs are designed to match the Mac Pro 4,1 memory specification and can be mixed with factory modules.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
minisforum MF-SRP01 SSD Heatsink accessories barebone
- SSD Heatsink
Intel HNS2600BPS24R 2U barebone pc dual Xeon DDR4 2.80 TB C622
- Xeon Bronze Xeon Go…
- DDR4-2933/PC4-23466



