A-Tech 32GB (2x16GB) DDR3 1600 ECC RDIMM 2Rx4 1.5V 240-Pin Server RAM
- 32GB (2 x 16GB)
- DDR3 1600 (PC3 1280…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A-Tech
A 32 GB dual-channel kit of DDR3 1333 MHz ECC registered server memory, 2×16 GB 2Rx4 modules at 1.5 V on 240-pin DIMMs
Capacity 32GB (2 x 16GB)
Speed DDR3 1333 (PC3 10600)
This 32GB kit contains two 16GB DDR3 1333 MHz modules built to the PC3-10600R standard. Each stick is a 240-pin registered DIMM with ECC, dual-rank x4 organisation and CL9 latency. The memory runs at the standard 1.5V DDR3 voltage and is intended for server and workstation platforms that require registered error-correcting memory.
These modules only fit systems designed for DDR3 registered ECC memory; they will not work in desktop or laptop computers. The dual-channel kit populates two slots and leaves remaining DIMM sockets free for further capacity expansion. Builders must verify their platform's qualified vendor list and follow the manual's channel-population rules before installation.
At the JEDEC-standard 1.5V the modules draw typical DDR3 registered DIMM power without elevated heat output. Passive airflow from a server chassis is normally sufficient; no additional cooling or high-wattage power supply headroom is required for the memory subsystem alone.
| Brand | A-Tech |
|---|---|
| Series | A-Tech DDR3 Server Memory RAM |
| Model | A-Tech 16GB 2Rx4 PC3-10600R |
| Capacity | 32GB (2 x 16GB) |
| Speed | DDR3 1333 (PC3 10600) |
| CAS Latency | CL9 |
| Voltage | 1.50V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Multi-channel Kit | Dual Channel Kit |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
At 1333 MHz (PC3-10600) with CL9 latency, this DDR3 kit delivers the rated throughput for platforms designed around that speed; sustained heavy loads will be limited by the bus frequency itself rather than the modules.
Each module operates at the standard 1.5 V DDR3 voltage; registered ECC DIMMs of this density typically draw a few watts per stick and run cool enough for normal server airflow without extra cooling.
The platform must accept DDR3 registered ECC DIMMs in a 240-pin slot, support dual-rank x4 organisation, and be a server or workstation class board — desktop and laptop systems are not compatible.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?