We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Eight green DDR4 RDIMM sticks, 288-pin, no heat spreader, 256GB kit

A-Tech

A-Tech 256GB (8x32GB) DDR4 2933 ECC RDIMM 1Rx4 Server RAM

SKU CH-JFZ2-CCVA8

Eight 32 GB DDR4 2933 MHz ECC registered DIMMs totalling 256 GB for server and workstation upgrades

  • Capacity256GB (8 x 32GB)
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.20V
  • ECCYes

Capacity 256GB (8 x 32GB)

  • 256GB total capacity from eight 32GB modules
  • DDR4 2933MHz speed for fast data throughput
  • ECC registered design detects and corrects memory errors
  • Single-rank 1Rx4 organisation optimises server density
  • 2V standard voltage keeps power draw low

256GB DDR4 2933 ECC RDIMM kit

This kit provides 256GB of DDR4 2933 registered ECC memory across eight 32GB modules. It is built for servers and workstations that require error-correcting registered DIMMs for data integrity and high-capacity workloads. The single-rank x4 organisation supports dense memory configurations on compatible platforms. Desktop and laptop systems cannot use these modules.

Registered ECC with major-brand chips

Each module uses major-brand DRAM chips and operates at the standard DDR4 voltage of 1.20V. Registered buffering reduces electrical load on the memory controller, while on-board ECC detects and corrects single-bit errors to protect critical data. The CL21 latency rating is specified for the 2933 MT/s speed grade.

Verify DDR4 RDIMM support and population rules

Check your system manual to confirm it accepts DDR4 288-pin registered ECC DIMMs and supports 32GB single-rank x4 modules at 2933 MT/s. Some platforms limit total capacity per channel or require specific slot-filling sequences for large kits. Ensure the BIOS is current before installation.

Highlights

  • 256GB total capacity from eight 32GB modules
  • DDR4 2933MHz speed for fast data throughput
  • ECC registered design detects and corrects memory errors
  • Single-rank 1Rx4 organisation optimises server density
  • 2V standard voltage keeps power draw low

Specifications

BrandA-Tech
SeriesA-Tech DDR4 Server Memory RAM
ModelA-Tech 32GB 1Rx4 PC4-2933Y-R
Part NumberAT32G8D4D2933RS4N12V
Capacity256GB (8 x 32GB)
Type288-Pin DDR4 SDRAM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
ChipsetMajor Brand Chipset
Heat SpreaderNo
FeaturesMajor Brand Chips / Error Correcting Technology for Server Systems

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will the 288-pin DDR4 modules need any firmware updates or thermal-pad replacements during their service life?

No firmware updates or thermal-pad replacements are required; the modules have no heat spreader and run at standard 1.20 V, so they operate maintenance-free once installed.

What electrical or thermal limit appears first when the 1Rx4 registered DIMMs run at 2933 MHz continuously?

The 1.20 V DDR4 standard voltage is the primary electrical ceiling; sustained loads stay within this spec, and the registered buffer helps keep signal integrity within JEDEC limits.

How much heat and noise do the eight 32 GB sticks generate when the server runs all day?

With no heat spreaders and a low 1.20 V operating voltage, the modules add minimal heat to the chassis airflow and produce zero acoustic noise themselves.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.