We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green printed circuit board with black memory chips, gold edge connector, single 288-pin DIMM stick

A-Tech

A-Tech 16GB DDR4 3200 CL22 1.2V 288-pin DIMM desktop RAM

SKU CH-6A9C-F3KRF

A 16 GB DDR4 desktop module running at 3200 MHz with CL22 latency and 1.2 V standard voltage

  • Capacity16GB
  • SpeedDDR4 3200 (PC4 25600)
  • Tested Frequency3200
  • CAS LatencyCL22
  • Voltage1.20V
  • ECCNo
  • Boosts multitasking with a single 16GB DDR4 module
  • Runs at 3200MHz PC4-25600 for faster data throughput
  • Low 1.20V operation reduces system power draw
  • CL22 latency supports responsive desktop performance
  • 288-pin DIMM fits standard desktop memory slots

Capacity and Compatibility

This 16GB DDR4 module runs at 3200 MHz with a CAS latency of 22 and operates at the standard 1.2V. It is an unbuffered, non-ECC DIMM built with major-brand chips and validated as a direct replacement for several Dell part numbers including AA498716 and SNPN205TC/16G.

Sustained Workload Behaviour

The module maintains its rated 3200 MHz frequency under continuous load because it uses standard-voltage DDR4 chips and a conventional unbuffered topology. Quality-assurance testing covers extended operation to confirm stable throughput during long rendering, compilation or virtualisation sessions.

Build and Daily Installation

A 288-pin gold-edge connector ensures a secure seat in any standard desktop DIMM slot, while the low-profile green PCB clears most CPU coolers without interference. The single-stick 16GB density leaves additional slots free for future expansion on typical four-slot motherboards.

Highlights

  • Boosts multitasking with a single 16GB DDR4 module
  • Runs at 3200MHz PC4-25600 for faster data throughput
  • Low 1.20V operation reduces system power draw
  • CL22 latency supports responsive desktop performance
  • 288-pin DIMM fits standard desktop memory slots

Specifications

BrandA-Tech
Capacity16GB
SpeedDDR4 3200 (PC4 25600)
Tested Frequency3200
CAS LatencyCL22
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor Brand Chips
FeaturesMajor Brand Chipset
Recommend UseAMD & Intel Compatible

Questions about this item

Does this module fit the Dell part numbers AA498716, AA721037, AB120717, C5N22, N205T, SNPC5N22C/16G, and SNPN205TC/16G?

Yes, it is a compatible equivalent for all seven Dell part numbers listed.

Will this 288-pin DDR4 DIMM work in my desktop if the board supports 3200 MT/s non-ECC unbuffered memory?

The stick runs at 3200 MT/s with CL22 at 1.2 V and is unbuffered non-ECC, matching standard desktop DDR4 slots.

What do I need to check before buying to be sure it works in my system?

Verify your motherboard or system manual for maximum capacity per slot, supported DDR4 speeds, and that it takes 288-pin unbuffered non-ECC modules.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.