We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green rectangular DDR4 DIMM with 288 gold pins and black chips

A-Tech

A-Tech 16GB DDR4 2133MHz CL15 2Rx8 desktop RAM

SKU CH-W881-4MM3W

A 16GB DDR4 2133MHz CL15 desktop DIMM tested for HP systems using major-brand chips

  • Capacity16GB
  • SpeedDDR4 2133 (PC4 17000)
  • Tested Frequency2133
  • CAS LatencyCL15
  • Voltage1.20V
  • ECCNo
  • 16 GB capacity lets you run heavier workloads
  • DDR4 2133 MHz speed matches PC4-17000 system requirements
  • CL15 latency and 1.20 V voltage keep timing tight and power low
  • 288-pin unbuffered DIMM fits standard desktop slots
  • Tested with major-brand chips for reliable operation

16GB DDR4 2133MHz module

This 16GB DDR4 2133MHz module is a single 288-pin DIMM rated at CL15 and 1.20V. It is built for desktop systems that accept unbuffered non-ECC memory. The stick uses major-brand chips and is tested at 2133 MT/s to deliver dependable capacity for everyday workloads.

HP part-number cross-reference

The module replaces HP part numbers 797347-591, 798035-001, 834933-001, 840819-001, T0E52AA, T0E52AT, Y3X96AA and Y3X96AT. Matching these references lets you confirm compatibility before purchase without guessing supported configurations.

288-pin unbuffered DIMM build

The standard 288-pin DDR4 DIMM fits regular desktop slots and operates at the JEDEC 1.20V level. Unbuffered construction keeps the signal path direct, while the single-rank 2Rx8 organisation works with typical consumer motherboards that support 16GB per slot.

Highlights

  • 16 GB capacity lets you run heavier workloads
  • DDR4 2133 MHz speed matches PC4-17000 system requirements
  • CL15 latency and 1.20 V voltage keep timing tight and power low
  • 288-pin unbuffered DIMM fits standard desktop slots
  • Tested with major-brand chips for reliable operation

Specifications

BrandA-Tech
Capacity16GB
SpeedDDR4 2133 (PC4 17000)
Tested Frequency2133
CAS LatencyCL15
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor Brand Chips
FeaturesMajor Brand Chipset
Recommend UseAMD & Intel Compatible

Questions about this item

Will the 1.20V DDR4 module need any voltage adjustment or replacement as it ages?

The module runs at the standard 1.20V DDR4 voltage and is unbuffered non-ECC; no voltage adjustment is required and the chips are tested for long-term reliability.

What limit appears first when the 16GB stick runs at 2133MHz CL15 for hours?

The CAS latency of CL15 at 2133MHz sets the timing boundary; sustained throughput is capped by that rated speed and latency.

How much heat or noise does the 288-pin DIMM produce during all-day use?

As a passive 1.20V DDR4 DIMM with no fan or moving parts, it generates minimal heat and zero audible noise under continuous load.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.