We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Five black heavy-wall heat-shrink conduit pieces, 48 inches long, adhesive-lined, 3:1 shrink ratio

3M

3M HDT-4500 48" Black 5 PCS Adhesive Lined Heat Shrink Conduit

SKU CH-4D94-CRFZZ

Heavy-wall adhesive-lined heat-shrink conduit, 48 in long, 3:1 shrink ratio from 4.5 in to 1.5 in, 0.17 in wall, rated -67 to 230 °F, 250 °F min shrink, pack of five

  • TypeCable Management & Conduit
  • Heavy-wall polyolefin resists abrasion, acids and alkalis
  • 3:1 shrink ratio covers 1000 to 2500 MCM wire sizes
  • Adhesive lining seals out moisture after shrinking
  • Flame-retardant material rated from -67 °F to 230 °F
  • Each 48-inch piece shrinks from 4.5 in to 1.5 in ID with .17 in wall

Heavy-Wall Heat-Shrink Conduit

This 3M adhesive-lined conduit protects large-gauge cables with a semi-rigid polyolefin wall that resists flame, abrasion, acid and alkali. Each piece shrinks from 4.5 in to 1.5 in inner diameter at a 3:1 ratio, leaving a .17 in wall after recovery. The 48 in length suits long-run sealing in harsh environments.

For Sealing Large-Cable Bundles

Builders insulating 1000 to 2500 MCM conductors gain a water-tight, mechanically tough sleeve that withstands -67 to 230 °F. Installers needing a thinner wall, a lower shrink temperature than 250 °F, or a shorter cut length should choose a different conduit.

3:1 Shrink Ratio Decides Fit

The 4.5 in to 1.5 in transition is the single measure that determines whether this conduit will seal your specific cable bundle. Verify the conductor diameter falls inside that range before ordering.

Highlights

  • Heavy-wall polyolefin resists abrasion, acids and alkalis
  • 3:1 shrink ratio covers 1000 to 2500 MCM wire sizes
  • Adhesive lining seals out moisture after shrinking
  • Flame-retardant material rated from -67 °F to 230 °F
  • Each 48-inch piece shrinks from 4.5 in to 1.5 in ID with .17 in wall

Specifications

Brand3M
TypeCable Management & Conduit

Questions about this item

How thick is the wall after the 3M HDT-4500 shrinks to its final 1.5 in diameter?

The wall measures 0.17 in once the tubing has fully recovered to its 1.5 in inside diameter.

Will the adhesive-lined polyolefin withstand continuous exposure at the upper end of its -67 to 230 °F range?

The material is rated for continuous operation up to 230 °F and the adhesive remains stable throughout that range.

What minimum wire size must already be in place for this 4.5 in supplied diameter to shrink down effectively?

The tubing is designed for cables from 1000 MCM up to 2500 MCM, so the conductor must fall within that range.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.