We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Beige silicone splash guard 23 inches long 3.5 inches high with seven suction cups

23" Silicone Sink Splash Guard Beige 3.5" High 7 Suction Cups

SKU CH-1K7J-0AW6X

A 23-inch silicone splash guard with a 3.5-inch high wall and seven suction cups blocks water and drains it back into the sink

  • 23 inch length covers 99% of sink widths
  • 5 inch high splash wall blocks water from reaching countertops
  • Hem flow guiding design drains water back into the sink automatically
  • Food grade silicone withstands temperatures from -40 to 230 degrees
  • 7 strong suction cups secure guard on flat or raised edges

What this guard is and who it suits

This beige silicone splash guard measures 23 inches long, 3.9 inches wide and 3.5 inches high. It is designed for kitchen sinks, bathroom sinks or island counters where the front edge is flat and at least 1.57 inches wide. The guard attaches with seven strong suction cups and is intended to keep water off clothes, floors and worktops. It is not suitable for circular, curved or angular sink rims.

Practical limits of the suction-mount design

The seven suction cups require a smooth, flat mounting surface at least 1.57 inches wide on the front edge of the sink. Curved, rounded or angled edges will prevent a secure seal and the guard may detach. The unit operates safely from -40 to 230 degrees, so it withstands boiling water and freezing conditions. Buyers whose sink rim is narrower than 1.57 inches or shaped other than flat cannot use this guard.

The specification that decides fit

The critical measurement is the 1.57-inch minimum flat width on the front edge of the sink. If your sink rim meets that width and is straight, the 23-inch guard with its 3.5-inch high wall and self-draining hem will cover more than 99 percent of typical sink widths. If the rim is narrower, curved or angled, the guard will not stay in place.

Highlights

  • 23 inch length covers 99% of sink widths
  • 5 inch high splash wall blocks water from reaching countertops
  • Hem flow guiding design drains water back into the sink automatically
  • Food grade silicone withstands temperatures from -40 to 230 degrees
  • 7 strong suction cups secure guard on flat or raised edges

Specifications

No published specifications for this item yet.

Questions about this item

How do I know if the 23-inch length will cover my sink?

The guard spans 23 inches and exceeds 99% of typical sink widths, so measure your basin edge to confirm it is shorter than that length.

What does the 3.5-inch high splash wall actually stop in daily use?

A 3.5-inch vertical barrier blocks water that would otherwise jump onto the counter, clothes or floor while washing up.

How do the 7 suction cups attach and what surface do they need?

Seven cups grip a flat or raised tabletop edge that is at least 1.57 inches wide; curved, circular or angular fronts will not hold.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.