We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

16AWG 8 Pin PCIe Cable for EVGA Modular PSU 63cm 2pcs

SKU CH-68N1-ZZG3M

Two 63 cm 16 AWG sleeved PCIe cables with 8-pin male to 8-pin (6+2) male connectors for EVGA modular PSUs

  • TypeExtension Cable
  • Length< 1"
  • Cable Length32.8 ft.
  • Specifications0708494200530, PCIE, YQMRCZRF
  • Sports Team2 Piece
  • Terminal GenderMale to Female
  • Safely powers high-load GPUs with 16AWG tinned copper wire
  • 63 cm sleeved length fits full-size tower builds
  • 8-pin to 8-pin (6+2) design works with 6-pin and 8-pin graphics cards
  • Compatible with EVGA GQ, G2, P2, T2 and G series units from 550 W to 1600 W
  • Two cables included for dual-GPU or single-card dual-connector setups

Compatible EVGA modular PSU cable set

This pair of 16AWG PCIe cables fits EVGA modular power supplies including 550G2, 650G2, 750G2, 850G2, 1000G2, 750P2, 850P2, 1000P2, 1200P2, 1600P2, 750T2, 850T2, 1000T2 and 1600T2 models. They are not compatible with Thermaltake Smart, Seasonic or Corsair units.

Sleeved 16AWG tinned copper construction

Each cable uses UL1007 rated 16AWG tinned copper wire with a black ribbon sleeve for durability. One end carries an 8-pin male connector for the PSU, the other an 8-pin (6+2) male connector for the graphics card. The two connector types are not interchangeable.

63cm length for tidy routing

At 63cm the cables reach most GPU positions without excess slack. The thicker 16AWG cores keep resistance low so the cables stay cool even when the graphics card runs at full load. Buyers needing longer runs or different PSU brands should look elsewhere.

Highlights

  • Safely powers high-load GPUs with 16AWG tinned copper wire
  • 63 cm sleeved length fits full-size tower builds
  • 8-pin to 8-pin (6+2) design works with 6-pin and 8-pin graphics cards
  • Compatible with EVGA GQ, G2, P2, T2 and G series units from 550 W to 1600 W
  • Two cables included for dual-GPU or single-card dual-connector setups

Specifications

BrandApple
Model0708494200530
TypeExtension Cable
Length< 1"
Cable Length32.8 ft.
Specifications0708494200530, PCIE, YQMRCZRF
Sports Team2 Piece
Terminal GenderMale to Female
Refresh Rate25 inches
FeaturesPCIE, YQMRCZRF, 0708494200530
DisclaimerUL

Questions about this item

What PCIe power standard does the 16AWG cable support for graphics cards?

The cable delivers power through an 8-pin male connector on the PSU side and an 8-pin (6+2) male connector on the graphics card side, compatible with mainstream 6-pin and 8-pin GPUs.

What clearance and connector orientation are required to fit the 63cm sleeved cables?

Each cable measures 63cm end to end with a black ribbon construction and sleeved protection; the PSU end uses a fixed 8-pin male plug while the GPU end splits into a 6+2 pin male connector.

How are the cables installed on an EVGA modular PSU, and which orientation mistake is common?

Insert the 8-pin male end firmly into the EVGA modular port labelled PCIe, then plug the 6+2 pin male end into the graphics card; the 8-pin and 6+2 ends are not interchangeable.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.