We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small 4-pin maglev CPU cooler fan with two-tone finish

Zyvpee

Zyvpee ZB0506PGV1-6A Maglev CPU Cooler Fan 4 Pin 1600 RPM

SKU CH-PKCZ-NQ0W2

Maglev-bearing 4-pin CPU cooler fan spins up to 1600 RPM for Dell Vostro 1014 and 1088 notebooks

  • TypeCPU Cooler Fan
  • Bearing TypeMaglev
  • RPM<1600 RPM
  • Power Connector4 Pin
  • Color2-Tone
  • LEDNon-LED
  • Maglev bearing reduces friction for quieter operation
  • 4-pin PWM connector enables precise speed control
  • 1600 RPM maximum speed delivers strong airflow
  • Designed for Dell Vostro 1014 and 1088 models
  • DC blower design directs air over heatsink efficiently

Dell Vostro 1014 and 1088 fit

This Maglev CPU cooler fan is built as a direct replacement for the Dell Vostro 1014 and 1088 notebooks. It runs on a 5 V, 0.35 A supply and connects through a four‑wire PWM header. The blower‑style impeller pushes air through the heatsink to keep the processor within thermal limits.

Upgrade from a worn original cooler

When the factory fan becomes noisy, spins below its rated speed or fails completely, this unit restores the intended airflow. The jump is worth it if the laptop throttles under load or the original bearing has developed rattle. It matches the OEM form factor so no chassis modification is required.

Straightforward drop‑in installation

Align the screw holes with the heatsink, plug the four‑pin connector into the motherboard header and secure the fan. The most common issue is routing the thin cable so it does not foul the fan blades or the keyboard ribbon. Verify the blade spins freely before closing the case.

Highlights

  • Maglev bearing reduces friction for quieter operation
  • 4-pin PWM connector enables precise speed control
  • 1600 RPM maximum speed delivers strong airflow
  • Designed for Dell Vostro 1014 and 1088 models
  • DC blower design directs air over heatsink efficiently

Specifications

BrandZyvpee
SeriesZB0506PGV1-6A
ModelZB0506PGV1-6A
TypeCPU Cooler Fan
Bearing TypeMaglev
RPM<1600 RPM
Power Connector4 Pin
Color2-Tone
LEDNon-LED
FeaturesCPU Cooling

Questions about this item

Will the 4-pin connector on this ZB0506PGV1-6A cooler fit the motherboard header on my Dell Vostro 1014?

Yes, the 4-wire connector is specified for the Vostro 1014 and 1088 models, matching the original 0Y34KC and 3CVM8FAWI20 part numbers.

What is the correct way to seat this maglev blower so the screws don't strip the plastic housing?

Align the four mounting holes with the heatsink posts, start each screw by hand until finger-tight, then give a final quarter-turn with a small Phillips driver — over-torquing cracks the frame.

How often should I clean dust from the maglev bearing in this 5 V 0.35 A blower?

Blow compressed air through the intake vents every six months; the sealed maglev bearing itself needs no lubrication or replacement during the cooler's service life.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.