Zyvpee
Zyvpee SJ8025HA2 80×25mm AC case fan 220–240V 50/60Hz 0.06A 2-wire
80 mm AC axial fan with dual-ball bearing for 220–240 V cabinets and UPS units
- TypeCase Fan
- Bearing Type2 Ball
- Power Connector2 wires
- ColorBlack
- LEDNon-LED
- FeaturesAC Axial Fan
- Runs on standard mains power at 220–240V 50/60Hz
- Dual ball bearings extend service life in continuous operation
- Slim 25mm profile fits tight 80mm mounting points
- Two-wire lead simplifies wiring in cabinets and UPS units
- AC axial design delivers steady airflow without PWM control
Compact AC cooling for industrial cabinets
The Zyvpee SJ8025HA2 is an 80 × 25 mm axial fan built for mains-powered equipment. It targets installers who need reliable airflow inside UPS units, inverter enclosures or similar cabinets without relying on a low-voltage supply. The two-ball bearing supports continuous duty in stationary hardware.
Direct 220–240 V operation simplifies wiring
Rated for 50/60 Hz at 0.06 A, the fan connects with two wires straight to the AC line. This removes the need for a separate DC power brick or motherboard header. Airflow scales with line frequency, so the same unit covers both common mains standards. The fixed speed cannot be modulated by PWM or voltage control.
Two-ball bearing is the longevity spec that matters
The bearing type determines how long the fan survives in a sealed cabinet running 24/7. Ball construction resists the dust and heat cycles that degrade sleeve alternatives. No RPM, static-pressure or noise figures are published, so buyers must verify performance against their own thermal budget before committing.
Highlights
- Runs on standard mains power at 220–240V 50/60Hz
- Dual ball bearings extend service life in continuous operation
- Slim 25mm profile fits tight 80mm mounting points
- Two-wire lead simplifies wiring in cabinets and UPS units
- AC axial design delivers steady airflow without PWM control
Specifications
| Series | SJ8025HA2 |
|---|---|
| Model | SJ80025HA2 |
| Type | Case Fan |
| Bearing Type | 2 Ball |
| Power Connector | 2 wires |
| Color | Black |
| LED | Non-LED |
| Features | AC Axial Fan |
| Dimensions | 80*80*25mm |
Questions about this item
Will the 220–240 V AC fan run from the same mains supply as my existing cabinet equipment?
The fan operates on 220–240 V AC at 50/60 Hz, matching standard mains voltage used by most cabinet and UPS equipment.
How can I confirm the 80×25 mm ball-bearing fan is spinning correctly after wiring the two leads?
With power applied you should hear smooth rotation from the 2-ball bearing and feel steady airflow through the 80 mm frame; no LED or signal wire is present to give a software reading.
Does the box include mounting screws or a power cable, or must I source them separately?
The supplied unit is the bare 80×25 mm AC axial fan with two lead wires only; mounting hardware and any mains wiring are not included.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



