Zyvpee
Zyvpee R128015DU 80*15mm 12V .50A 4-pin PWM case fan
An 80 mm PWM case fan with dual-ball bearings for CPU cooler compatibility
- TypeCase Fan
- CompatibilityCPU Cooler
- Bearing Type2 Ball
- Power Connector4 Pin
- ColorBlack
- LEDNon-LED
- PWM control adjusts speed precisely using 4-pin connector
- Dual ball bearing extends lifespan for continuous operation
- 12 V .50 A rating delivers reliable airflow
- Compact 80 x 15 mm frame fits tight CPU coolers
- Non-LED black design keeps builds clean and professional
Compact 80 mm PWM fan for tight CPU coolers
The Zyvpee R128015DU is an 80 mm square, 15 mm thick case fan built for CPU cooler mounting. It runs on 12 V at .50 A through a standard 4-pin PWM connector. Black, non-LED housing keeps the look neutral inside any chassis.
Dual-ball bearing sustains speed under constant load
The 2 Ball bearing design maintains consistent RPM during prolonged operation without the wear pattern seen in sleeve alternatives. PWM control lets the motherboard adjust speed to thermal demand rather than running at a fixed voltage. DC axial airflow targets heatsink fins directly.
Replaces noisy or failed 80 mm cooler fans
This unit fits coolers that accept an 80*80*15 mm footprint and a 4-pin header. The jump is worth it when the original fan develops bearing rattle or cannot spin low enough for quiet idle. Builders needing larger diameters or addressable lighting should look elsewhere.
Highlights
- PWM control adjusts speed precisely using 4-pin connector
- Dual ball bearing extends lifespan for continuous operation
- 12 V .50 A rating delivers reliable airflow
- Compact 80 x 15 mm frame fits tight CPU coolers
- Non-LED black design keeps builds clean and professional
Specifications
| Series | R128015DU |
|---|---|
| Model | R128015DU |
| Type | Case Fan |
| Compatibility | CPU Cooler |
| Bearing Type | 2 Ball |
| Power Connector | 4 Pin |
| Color | Black |
| LED | Non-LED |
| Features | DC axial fan |
| Dimensions | 80*80*15mm |
Questions about this item
How much power does the 12V .50A 4-pin PWM fan draw when running all day?
The fan is rated at 12V and 0.50A, giving a maximum draw of 6W during continuous operation.
What motherboard header is required for the 4-pin PWM connector on this 80mm fan?
A standard 4-pin PWM fan header on the motherboard is needed for speed control and monitoring.
Will the 80*80*15mm dimensions and 4-pin PWM control work with an older CPU cooler that used a 3-pin 80mm fan?
The 15mm thickness matches many legacy 80mm mounts, and the 4-pin PWM plug fits a 3-pin header running at full speed, though PWM control will be unavailable.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114926BTC
In stock
