We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black square 90mm case fan with 4-pin connector

Zyvpee

Zyvpee QUR0912VH 90*25mm 12V 0.6A 4-pin case fan

SKU CH-TAPB-HZK68

90 mm square case fan with 4-pin PWM control, ball bearing and 12 V 0.6 A rating

  • TypeCase Fan
  • CompatibilityCPU Cooler
  • Bearing TypeBall
  • Power Connector4 Pin
  • ColorBlack
  • LEDNon-LED
  • 12 V 0.6 A draw keeps power use low
  • 4-pin connector enables precise PWM speed control
  • 90 × 90 × 25 mm frame fits standard 9 cm mounts
  • ball bearing design extends operating life
  • non-LED black finish suits clean builds

Compact 90 mm case fan

The Zyvpee QUR0912VH is a 90 by 90 by 25 millimetre case fan designed for CPU cooler compatibility. It runs on 12 volts and draws .6 amps through a standard 4-pin connector. The ball bearing construction targets builders who need a reliable replacement for tight chassis layouts.

Thermals noise and power

At the rated 12 volt 0.6 amp input the fan delivers a DC square cooler profile without integrated lighting. The 4-pin header allows the motherboard to regulate speed based on temperature, keeping acoustic output proportional to load. No LED means zero light bleed in darkened builds.

Bundled extras

The package contains only the fan unit itself; no mounting screws, adapters or software utilities are included. Installers must supply their own 4-pin header and fasteners. Buyers who want RGB illumination or bundled cable ties should look elsewhere.

Highlights

  • 12 V 0.6 A draw keeps power use low
  • 4-pin connector enables precise PWM speed control
  • 90 × 90 × 25 mm frame fits standard 9 cm mounts
  • ball bearing design extends operating life
  • non-LED black finish suits clean builds

Specifications

SeriesQUR0912VH
ModelQUR0912VH
TypeCase Fan
CompatibilityCPU Cooler
Bearing TypeBall
Power Connector4 Pin
ColorBlack
LEDNon-LED
FeaturesDC square Cooler
Dimensions90*90*25mm

Questions about this item

How do I connect the 4-pin connector to the motherboard and what orientation mistake should I avoid?

Align the keyed 4-pin plug with the motherboard header so the clip faces the latch; forcing it backwards bends the pins and prevents PWM control.

What maintenance does the ball bearing require and when should the fan be replaced?

Ball bearings are sealed and need no lubrication; replace the fan if noise increases or speed drops below spec after extended use.

At what point does the 12 V 0.6 A rating become the limiting factor during continuous operation?

The 0.6 A draw is the steady-state limit; sustained loads that push the motor beyond this current will trigger thermal protection or voltage sag.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.