We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green rectangular circuit board with silver components and connectors

Zyvpee

Zyvpee PKP-K230N Lamp Driver Projector Lamp Power Board

SKU CH-1G7G-ZAHTV

Replacement lamp driver board supporting 440W, 450W, 455Wi and multiple projector models

  • Compatible with 440W and 450W projector lamps
  • Supports C1900 and C1915 series models
  • Works with EB 905W and 915W units
  • Fits C735W and C1050X projectors
  • Powers C2070WN and C2080XN devices

Zyvpee PKP-K230N Lamp Driver Board

The Zyvpee PKP-K230N is a replacement lamp driver power board designed for specific business projectors. It serves technicians and IT departments maintaining compatible models from the listed series. This component regulates power to the projector lamp module.

Thermals Noise and Power Draw

The board operates with compatible 440W, 450W and 455W lamp configurations in normal use. It manages the electrical load for the designated projector models without additional cooling requirements. No acoustic signature is produced by the board itself.

Build Fit and Compatibility

This driver fits projectors including the C1900, C1910, C1915, C735W and C730X series. It also supports C1050X, C1830 and EB 905W, 915W, 925 models. Additional compatibility covers PL910W, C2070WN, C2080XN and C1020XN units. Buyers needing a driver for other wattages or unlisted projector families should verify suitability before purchase.

Highlights

  • Compatible with 440W and 450W projector lamps
  • Supports C1900 and C1915 series models
  • Works with EB 905W and 915W units
  • Fits C735W and C1050X projectors
  • Powers C2070WN and C2080XN devices

Specifications

Brandzyvpee
SeriesPKP-K230N
ModelPKP-K230N

Questions about this item

How is the PKP-K230N lamp driver board installed and which step is most often missed?

Power off the projector, remove the cover, unplug the old board, fit the PKP-K230N in the same slot, reconnect the harness, then reseat the lamp module — skipping the lamp reseat causes ignition failure.

What maintenance or replacement will the PKP-K230N board need later?

The board itself is solid-state and needs no scheduled service; plan to replace the 440W, 450W or 455W lamp when brightness drops or hours expire.

What limit appears first on the PKP-K230N during sustained high-wattage operation?

Thermal protection on the driver IC triggers first when ambient heat builds, shutting down the 450W or 455W supply until the chassis cools.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.