We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 120mm square AC axial case fan 38mm thick two-pin

Zyvpee

Zyvpee P2123HBT-ES 120mm 38mm 230V 2 Pin case fan

SKU CH-4WMG-9QBAM

120 mm square, 38 mm thick AC axial case fan with 2‑ball bearing running on 230 V mains power

  • TypeCase Fan
  • CompatibilityCase
  • Bearing Type2 Ball
  • Power Connector2 Pin
  • ColorBlack
  • LEDNon-LED
  • Direct 230 V AC power removes need for separate power supply
  • Dual ball bearing extends operational life under continuous load
  • 120 mm × 38 mm frame fits standard 12 cm mounting points
  • 06 A draw keeps energy consumption low
  • 50/60 Hz compatibility suits global mains frequency

AC case fan for mains-powered builds

The Zyvpee P2123HBT-ES is a 120 mm square AC axial fan designed to mount directly in a standard case opening. It runs on 230 V mains voltage at 50/60 Hz and draws only 0.06 A, so it suits builders who want a simple always-on airflow device without a DC power supply.

Dual-ball bearing and two-pin lead

The fan uses a 2-ball bearing for longer life in continuous operation and a black 38 mm deep frame that fits typical 120 mm mounting holes. Its two-pin connector expects a direct AC supply, meaning there is no PWM or voltage control from a motherboard header; the fan spins at full speed whenever mains power is present.

Fixed-speed operation on mains voltage

Because the motor is driven straight from the AC line, speed cannot be adjusted by the system and the fan will run at its rated speed for as long as power is applied. Builders who need variable speed, low-noise curves or motherboard monitoring should choose a DC fan with a 3-pin or 4-pin connector instead.

Highlights

  • Direct 230 V AC power removes need for separate power supply
  • Dual ball bearing extends operational life under continuous load
  • 120 mm × 38 mm frame fits standard 12 cm mounting points
  • 06 A draw keeps energy consumption low
  • 50/60 Hz compatibility suits global mains frequency

Specifications

SeriesP2123HBT-ES
ModelP2123HBT-ES
TypeCase Fan
CompatibilityCase
Bearing Type2 Ball
Power Connector2 Pin
ColorBlack
LEDNon-LED
FeaturesAC Axial Fan
Dimensions120mm*120mm*38mm

Questions about this item

Does the 2-pin 230 V AC connector limit speed control to on/off only?

Yes, the two-pin mains connector supplies fixed 230 V 50/60 Hz power, so the fan runs at full speed whenever it is energised.

Will the 38 mm thickness fit a standard 120 mm mounting grid?

The frame is 120 mm square and 38 mm deep; verify your case or panel has at least 38 mm clearance behind the 120 mm screw holes.

How do I wire the fan without a polarity-sensitive connector?

Connect the two leads directly to a 230 V AC source; with AC there is no polarity, but always isolate the supply before making the joints.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.