We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 80mm square case fan with 3-pin connector

Zyvpee

Zyvpee MMF-08J24SS CP1 CA2164H01 80mm 24V 0.13A 3-pin case fan

SKU CH-BQKX-36WD0

80 mm case fan with 24 V, 0.13 A three-pin power and dual-ball bearings

  • TypeCase Fan
  • CompatibilityCase
  • Bearing Type2 Ball
  • Power Connector3 Pin
  • ColorBlack
  • LEDNon-LED
  • 80 mm frame fits tight case layouts
  • 24 V 0.13 A draw keeps power use low
  • dual ball bearings extend operating life
  • three-pin connector enables simple motherboard control
  • non-LED black design suits clean builds

Zyvpee 80mm 24V Case Fan

This Zyvpee case fan measures 80mm square by 25mm thick and runs on a 24V DC supply drawing 0.13A. It uses a 3-pin power connector and dual ball bearings for reliable airflow in industrial or server chassis. The black non-LED frame suits builds where lighting is not wanted.

3-Pin Connector Limits

The 3-pin interface provides power and tachometer feedback but cannot accept PWM speed signals from a motherboard header. Speed control therefore depends on voltage regulation from the host board or an external controller. Builders needing automatic PWM curves should verify their hardware supports voltage-based fan curves before fitting this unit.

Straightforward 80mm Mount

Four corner screw holes match the standard 80mm pattern so installation takes only a screwdriver and a minute. The 3-pin plug keys one way to prevent reversal, yet the thin wires can snag on tight cable routes behind drive cages. Ensure the connector reaches the header without tension and that no cables foul the blades.

Highlights

  • 80 mm frame fits tight case layouts
  • 24 V 0.13 A draw keeps power use low
  • dual ball bearings extend operating life
  • three-pin connector enables simple motherboard control
  • non-LED black design suits clean builds

Specifications

SeriesMMF-08J24SS CP1
ModelMMF-08J24SS CP1
TypeCase Fan
CompatibilityCase
Bearing Type2 Ball
Power Connector3 Pin
ColorBlack
LEDNon-LED
FeaturesDC square Cooler
Dimensions80*80*25mm

Questions about this item

Which version of this 80 mm fan fits my 24 V inverter cooler?

The MMF-08J24SS CP1 CA2164H01 is the exact model listed for 24 V operation with a 3-pin connector.

What does the 0.13 A rating mean once the fan is installed?

At 24 V the fan draws 0.13 A, giving a low power draw that suits inverter cooler circuits and standard 24 V rails.

What does the 3-pin connector cap in practice?

The 3-pin connector supplies fixed 24 V power and a tachometer signal, so speed is set by voltage and reported to the motherboard or controller.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.