We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black 50 mm blower fan with three wires

Zyvpee

Zyvpee MF50201V1-C000-F99 50mm 12V 1.62W 3-pin blower case fan

SKU CH-HJ4M-NF198

A 50 mm blower fan with Maglev bearing runs on 12 V and 1.62 W via a 3-pin connector for compact CPU cooling

  • TypeCPU Cooler Fan
  • CompatibilityCPU Cooler
  • Bearing TypeMaglev
  • Power Connector3 Pin
  • ColorBlack
  • LEDNon-LED
  • Maglev bearing reduces friction for longer life
  • 12 V 1.62 W power draw keeps energy use low
  • 50 mm blower design directs airflow through tight heatsinks
  • 3-pin connector fits standard motherboard headers
  • Non-LED black frame suits low-profile builds

Compact 50 mm blower for tight CPU coolers

This Zyvpee MF50201V1-C000-F99 is a 12 V, 1.62 W centrifugal blower designed to mount directly on a CPU cooler heatsink. Its 50 mm frame and maglev bearing target small-form-factor builds or replacement jobs where a standard axial fan cannot fit. The three-pin connector provides basic voltage control without PWM signalling.

Maglev bearing and bare-wire simplicity

The maglev bearing reduces mechanical contact, which lowers noise and extends service life compared with sleeve or ball alternatives. No LED lighting or extra cables are included, so the fan adds only the three power wires shown in the photos. Buyers who want RGB illumination or a four-pin PWM header will need a different model.

Straightforward swap if the mounting holes align

Installation consists of removing the old blower, matching the screw pattern, and plugging the three-pin connector into the motherboard or fan controller. The most common issue is a hole-spacing mismatch on proprietary cooler shrouds, so verify the physical layout against the supplied images before ordering. No software or driver setup is required.

Highlights

  • Maglev bearing reduces friction for longer life
  • 12 V 1.62 W power draw keeps energy use low
  • 50 mm blower design directs airflow through tight heatsinks
  • 3-pin connector fits standard motherboard headers
  • Non-LED black frame suits low-profile builds

Specifications

BrandZyvpee
SeriesMF50201V1-C000-F99
ModelMF50201V1-C000-F99
TypeCPU Cooler Fan
CompatibilityCPU Cooler
Bearing TypeMaglev
Power Connector3 Pin
ColorBlack
LEDNon-LED
FeaturesCPU Cooling Blower

Questions about this item

How long does the maglev bearing typically last before it needs replacement?

Maglev bearings use magnetic levitation instead of physical contact, so there is no mechanical wear to schedule a replacement interval for.

What limits continuous operation of this 12 V 1.62 W blower first — thermal throttling or current draw?

The fan draws a fixed 1.62 W at 12 V, so current draw is constant and thermal throttling is not a factor for the blower itself.

How much noise and heat does the 50 mm blower produce when running all day?

The 12 V 1.62 W motor generates only modest heat, and the maglev bearing keeps acoustic output low during continuous use.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.