We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 120mm square case fan 38mm thick 2-wire non-LED

Zyvpee

Zyvpee MEC0381V1-000C-A99 120mm 38mm 12V 10W 2Wire case fan

SKU CH-C9H0-4JC8W

120 mm square case fan with 38 mm depth, dual-ball bearing and 12 V 10 W two-wire power

  • TypeCase Fan
  • CompatibilityCase
  • Bearing Type2 Ball
  • Power Connector2 Wires
  • ColorBlack
  • LEDNon-LED
  • High airflow with 120 mm by 38 mm frame
  • Reliable dual-ball bearing for long service life
  • Direct 12 V DC power at 10 W draw
  • Simple two-wire connection for quick install
  • Non-LED black design suits any build

SUNON 120 mm 38 mm dual-ball bearing case fan

The Zyvpee MEC0381V1-000C-A99 is a 12 V, 10 W case fan built around a dual-ball bearing for extended service life. Its 120 mm by 120 mm frame measures 38 mm thick, making it deeper than standard slim fans. The two-wire power connector supplies DC voltage without speed reporting or PWM control. Black, non-LED blades keep the appearance neutral inside any chassis.

Suited for high-static-pressure cooling in servers

Builders who need strong airflow through restrictive meshes, thick radiators or tightly packed drive cages will benefit from the 38 mm depth and ball-bearing durability. Systems that rely on motherboard fan-curve management or require a tachometer signal cannot use this two-wire design. Quiet-focused desktop users seeking low-RPM operation or PWM speed control should look at alternative models.

The two-wire 12 V connector determines motherboard

This fan draws power directly from a 12 V header but cannot report RPM or accept PWM duty-cycle commands. Verify that your board or fan controller can run a constant-voltage device without a tachometer feedback loop. If automatic speed curves or monitoring are required, this connector type will not support those functions.

Highlights

  • High airflow with 120 mm by 38 mm frame
  • Reliable dual-ball bearing for long service life
  • Direct 12 V DC power at 10 W draw
  • Simple two-wire connection for quick install
  • Non-LED black design suits any build

Specifications

SeriesMEC0381V1-000C-A99
ModelMEC0381V1-000C-A99
TypeCase Fan
CompatibilityCase
Bearing Type2 Ball
Power Connector2 Wires
ColorBlack
LEDNon-LED
FeaturesDC square Cooler
Dimensions120mm*120mm*38mm

Questions about this item

Should I choose the 120 mm by 38 mm version or a thinner model?

This model is 120 mm square and 38 mm thick with a 2-ball bearing and 2-wire power connector. A thinner fan would have a different depth and may not fit the same mounting points.

What does the 10 W rating mean when the fan is running in my case?

At 12 V the fan draws 10 W, which determines its maximum airflow and static pressure. Actual speed and noise will depend on the voltage supplied by your motherboard or fan controller.

The fan uses a 2-wire connector — what does that limit in practice?

A 2-wire connector provides power only, so the fan runs at full speed whenever voltage is applied. Speed control requires an external voltage regulator or a fan controller that varies the supply voltage.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.