We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 40mm square maglev case fan, 10mm thick, no LED

Zyvpee

Zyvpee ME40101V1-000C-A99 40x10mm 12V 1.08W maglev 2-wire case fan

SKU CH-ZSMN-VGVZ2

A 40 mm maglev case fan running at 12 V and 1.08 W with a two-wire power connector

  • TypeCase Fan
  • CompatibilityCase
  • Bearing TypeMaglev
  • Power Connector2 wires
  • ColorBlack
  • LEDNon-LED
  • Maglev bearing reduces friction for quieter operation
  • 12 V 1.08 W power draw keeps energy use low
  • 40 mm square frame fits tight case spaces
  • Non-LED black design suits stealth builds
  • Two-wire DC connection simplifies installation

Compact maglev case fan

The Zyvpee ME40101V1-000C-A99 is a 40 mm square case fan that runs on 12 V and draws 1.08 W. Its maglev bearing reduces friction and noise while maintaining steady airflow in confined chassis spaces. The two-wire power connector provides simple voltage control without PWM signalling.

For tight clearances, not high-volume cooling

Builders fitting a 40 x 10 mm slot in mini-ITX cases, rack units or industrial enclosures will find the dimensions match exactly. The non-LED black frame keeps the appearance neutral. Systems that need higher static pressure or larger air volume should look at bigger frame sizes because this fan is limited to its 40 mm footprint.

Maglev bearing on two-wire power

The maglev bearing is the deciding specification; it offers longer life and quieter operation than sleeve or ball bearings at this scale. The 2-wire connector means speed varies only with voltage, so the motherboard or fan controller must support DC voltage regulation.

Highlights

  • Maglev bearing reduces friction for quieter operation
  • 12 V 1.08 W power draw keeps energy use low
  • 40 mm square frame fits tight case spaces
  • Non-LED black design suits stealth builds
  • Two-wire DC connection simplifies installation

Specifications

SeriesME40101V1-000C-A99
ModelME40101V1-000C-A99
TypeCase Fan
CompatibilityCase
Bearing TypeMaglev
Power Connector2 wires
ColorBlack
LEDNon-LED
FeaturesDC square Cooler
Dimensions40*40*10mm

Questions about this item

What case opening size does the 40 mm square frame of this fan require?

The fan measures 40 by 40 by 10 mm, so it fits a standard 40 mm square mounting hole pattern with 10 mm depth clearance.

How do I connect the two bare wires to a 12 V fan header, and which polarity step is often missed?

Connect the red wire to the 12 V pin and the black wire to ground; the step people miss is verifying polarity before powering on because the connector is not keyed.

When will the maglev bearing need replacement, and what indicates it is worn?

Maglev bearings are rated for long life with no contact wear; replacement is only needed if the fan develops audible noise or vibration after extended use.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.