We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black 50 by 10 mm maglev case fan two wire

Zyvpee

Zyvpee MB50100V2-0000-A99 50×10 mm 5 V 1.18 W 2-pin maglev case fan

SKU CH-MBCW-M3X3X

A 50 × 10 mm maglev case fan running below 1600 RPM at 5 V and 1.18 W with a 2-pin connector for CPU cooler compatibility

  • TypeCase Fan
  • CompatibilityCPU Cooler
  • Bearing TypeMaglev
  • RPM<1600 RPM
  • Power Connector2 Pin
  • ColorBlack
  • Compact 50 × 10 mm footprint fits tight CPU coolers
  • Maglev bearing reduces friction for quieter operation
  • 18 W draw keeps power load low
  • Sub-1600 RPM speed balances airflow and noise
  • 2-pin 5 V connector enables simple installation

Compact 50 mm maglev fan for CPU coolers

This Zyvpee 50 × 10 mm case fan uses a maglev bearing and runs at up to 1600 RPM on a 5 V supply. It draws 1.18 W through a two-pin connector and is finished in black without LED lighting. The frame is designed to fit CPU cooler mounting points.

Check 5 V header and mounting clearance

Verify that your motherboard or controller provides a 5 V two-pin header for power. Measure the available space on the CPU cooler to confirm the 50 mm square footprint and 10 mm thickness will fit without interfering with surrounding components. The fan has no PWM lead, so speed control depends on voltage regulation.

Two-wire power cable only

The bundle supplies the fan and its attached two-wire cable; no additional brackets, screws or software are included. Installation relies on the cooler’s existing mounting hardware. The absence of a third wire means the system cannot read a tachometer signal from this unit.

Highlights

  • Compact 50 × 10 mm footprint fits tight CPU coolers
  • Maglev bearing reduces friction for quieter operation
  • 18 W draw keeps power load low
  • Sub-1600 RPM speed balances airflow and noise
  • 2-pin 5 V connector enables simple installation

Specifications

BrandZyvpee
SeriesMB50100V2-0000-A99
ModelMB50100V2-0000-A99
TypeCase Fan
CompatibilityCPU Cooler
Bearing TypeMaglev
RPM<1600 RPM
Power Connector2 Pin
ColorBlack
LEDNon-LED
FeaturesCPU Cooling
Dimensions50 * 10 MM

Questions about this item

What comes in the box and is a fan header or adapter needed?

The package includes the 50 mm maglev fan with a 2-pin power lead. If your motherboard or controller only has 3-pin or 4-pin headers you will need a 2-pin to 3-pin or 2-pin to 4-pin adapter, which is sold separately.

Which version of this 50 mm fan should I choose for a CPU cooler?

The MB50100V2-0000-A99 is the single 5 V, 1.18 W model rated below 1600 RPM. It is the only version listed, so select it when you need a 50×10 mm maglev fan for CPU cooling.

What does the sub-1600 RPM rating mean once the fan is installed?

At full voltage the fan spins below 1600 RPM, delivering quiet airflow for a 50 mm CPU cooler. Speed will vary with the 5 V supply and any motherboard voltage control you apply.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.