We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Zyvpee

Zyvpee KD1204PKBX-A 4020 2-Pin Ball Bearing Case Fan 40x40x20mm Black

SKU CH-C5JZ-79VEW

Compact 40×40×20 mm ball-bearing fan runs on 5 V and 0.4 W for CPU or router cooling

  • TypeCase Fan
  • CompatibilityCPU Cooler
  • Bearing TypeBall
  • Power Connector2 Pin
  • ColorBlack
  • LEDNon-LED
  • Ball-bearing design extends service life
  • 5 V, 0.4 W power draw keeps energy use low
  • 40×40×20 mm frame fits tight 4020 mount points
  • Two-pin DC connector simplifies wiring
  • Non-LED black finish suits discreet builds

Compact 40 mm Cooling Fan

The Zyvpee KD1204PKBX-A is a 40x40x20 mm case fan designed for tight spaces such as small-form-factor CPU coolers or network equipment. It runs on a 5 V supply and draws 0.4 W through a two-pin connector. The black frame and non-LED design keep the appearance neutral. Ball-bearing construction supports continuous operation in always-on devices.

Upgrade From Sleeve-Bearing 4020 Fans

This unit replaces older 4020 fans that use sleeve bearings and develop noise or seizure over time. The jump is worth it when the existing fan rattles, slows under load or fails to spin up reliably at 5 V. Builders maintaining legacy router boards or compact heatsinks gain longer service intervals without changing mounting holes or voltage rails.

Limits Of The Two-Pin 5 V Interface

Speed is fixed by the supplied voltage because the two-pin connector carries no PWM or tachometer signal. The motherboard or controller cannot modulate RPM or monitor rotation, so thermal curves must be managed by varying the 5 V rail itself. Systems that require automatic fan curves or stall detection need a three- or four-pin header instead.

Highlights

  • Ball-bearing design extends service life
  • 5 V, 0.4 W power draw keeps energy use low
  • 40×40×20 mm frame fits tight 4020 mount points
  • Two-pin DC connector simplifies wiring
  • Non-LED black finish suits discreet builds

Specifications

SeriesKD1204PKBX-A
ModelKD1204PKBX-A
TypeCase Fan
CompatibilityCPU Cooler
Bearing TypeBall
Power Connector2 Pin
ColorBlack
LEDNon-LED
FeaturesDC square Cooler
Dimensions40*40*20mm

Questions about this item

Will the 40x40x20mm frame fit my CPU cooler mounting holes?

The fan measures 40mm by 40mm with a 20mm thickness, matching the standard 4020 footprint used on many compact CPU coolers.

How do I connect the 2-pin power cable correctly?

Align the two wires with the motherboard or controller header; the connector is keyed so it only seats one way — forcing it backwards bends the pins.

When should I expect to replace the ball-bearing fan?

Ball bearings typically run for tens of thousands of hours; listen for new rattling or a drop in airflow as the signal to swap it out.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.