We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 60x60x20mm maglev case fan with 4-pin connector

Zyvpee

Zyvpee GM1206PKVX-A B4124.F.GN 60x60x20mm 12V 3.0W 4-pin case fan

SKU CH-JTP0-H3NR1

A 60 mm maglev case fan with 4-pin PWM control, 12 V 3.0 W draw and square frame for server chassis

  • TypeCase Fan
  • Bearing TypeMaglev
  • Power Connector4 Pin
  • ColorBlack
  • LEDNon-LED
  • FeaturesDC square Cooler
  • Maglev bearing reduces friction for longer life
  • 12 V 3.0 W power draw keeps energy use low
  • 4-pin PWM connector enables precise speed control
  • 60 × 60 × 20 mm size fits tight server chassis
  • Designed for K650T-A00 server case compatibility

Zyvpee 60mm maglev case fan

The Zyvpee GM1206PKVX-A is a 60 by 60 by 20 millimetre axial fan built for the K650T-A00 server chassis. It runs on 12 volts and draws 3.0 watts through a four-pin power connector. The maglev bearing and black non-LED frame target system integrators who need a direct replacement cooler for that specific platform.

Four-pin PWM plug installs in seconds

The fan ships with a standard four-wire connector that keys into the server’s existing header, so no adapter or soldering is required. Alignment tabs on the housing prevent reverse insertion, and the square mounting holes match the chassis screw pattern exactly. The only common issue is forgetting to route the cable clear of adjacent drive cages before tightening the screws.

Verify K650T-A00 fit before ordering

Confirm the chassis label reads K650T-A00 and that the current fan measures 60 by 60 by 20 millimetres with a four-pin header. Check that the motherboard or fan controller supplies a 12 volt PWM signal, because the maglev motor expects that control scheme. If the server uses a different form factor or a three-pin header, this unit will not mount or function correctly.

Highlights

  • Maglev bearing reduces friction for longer life
  • 12 V 3.0 W power draw keeps energy use low
  • 4-pin PWM connector enables precise speed control
  • 60 × 60 × 20 mm size fits tight server chassis
  • Designed for K650T-A00 server case compatibility

Specifications

SeriesGM1206PKVX-A
ModelGM1206PKVX-A
TypeCase Fan
Bearing TypeMaglev
Power Connector4 Pin
ColorBlack
LEDNon-LED
FeaturesDC square Cooler
Dimensions60*60*20mm

Questions about this item

How do I confirm the 12 V 3.0 W fan is spinning correctly after installation?

Connect the 4-pin connector to the motherboard or fan controller, power on the system, and verify rotation through BIOS fan-speed readout or monitoring software.

What comes with the GM1206PKVX-A B4124.F.GN unit and what must be sourced separately?

The package contains the 60×60×20 mm maglev case fan with its attached 4-pin lead; mounting screws and any fan-hub or splitter cables are not included.

Which version of the 6020-size fan matches the K650T-A00 server chassis?

Choose the GM1206PKVX-A B4124.F.GN model rated at 12 V 3.0 W with a 4-pin connector, as specified for the K650T-A00 case.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.