We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black 40 by 28 millimetre case fan with three wires

Zyvpee

Zyvpee FFB0412VHN F00 40x28mm 12V .24A 3 Pin Ball Bearing Case Fan

SKU CH-5BN8-FRRGR

A 40 by 28 millimetre ball-bearing case fan running at 12 volts and 0.24 amps with a three-pin connector

  • TypeCase Fan
  • Bearing TypeBall
  • Power Connector3 Pin
  • ColorBlack
  • LEDNon-LED
  • FeaturesDC Case Fan
  • Compact 40×28 mm footprint fits tight 1U server bays
  • Ball bearing design reduces friction for longer operational life
  • 12 V / 0.24 A draw keeps power consumption low
  • Three-pin connector enables straightforward motherboard control
  • Non-LED black frame maintains a clean, professional look

Zyvpee 40×28 mm 12 V ball-bearing fan

The Zyvpee FFB0412VHN F00 is a compact 40 mm by 28 mm case fan built for 12 V DC operation. Its ball bearing and three-wire connector suit tight server or workstation chassis where a slim 1U profile is required.

Replaces 40×28 mm sleeve-bearing units

Swapping an older 4028 sleeve fan for this ball-bearing model reduces wear noise and extends service life in continuous-duty environments. The upgrade is worthwhile when the existing fan rattles, runs hot or fails to spin up reliably at 0.24 A draw.

Check 3-pin header and 1U clearance

Verify the motherboard or fan controller supplies a standard three-pin DC header at 12 V. Confirm the chassis allows exactly 28 mm thickness and 40 mm square mounting holes before ordering.

Highlights

  • Compact 40×28 mm footprint fits tight 1U server bays
  • Ball bearing design reduces friction for longer operational life
  • 12 V / 0.24 A draw keeps power consumption low
  • Three-pin connector enables straightforward motherboard control
  • Non-LED black frame maintains a clean, professional look

Specifications

BrandZyvpee
SeriesFFB0412VHN
ModelFFB0412VHN
TypeCase Fan
Bearing TypeBall
Power Connector3 Pin
ColorBlack
LEDNon-LED
FeaturesDC Case Fan
Dimensions40*28mm

Questions about this item

Will the 40 mm by 28 mm frame fit a standard 1U server slot?

Yes, the 40x28 mm dimensions match the 1U form factor used in many rackmount chassis.

How do I connect the three-wire lead to a motherboard header?

Align the keyed 3-pin connector with the 12 V fan header and press straight down; the third wire carries the tachometer signal.

When should I plan to replace the ball-bearing fan?

Ball bearings typically run for tens of thousands of hours; replace the unit if noise increases or RPM drops noticeably.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.