We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Zyvpee

Zyvpee DA12032B48U P003 120x32mm 48V 0.35A 4-pin case fan

SKU CH-QV5N-NMQTG

A 120 mm case fan with 32 mm thickness, dual ball bearings and a 48 V four-pin connector for server-grade airflow

  • TypeCase Fan
  • Bearing Type2 Ball
  • Power Connector4 Pin
  • ColorBlack
  • LEDNon-LED
  • FeaturesPower Cooling
  • Dual-ball bearing for longer service life
  • 48 V DC input suits industrial or server chassis
  • Four-pin PWM connector enables automatic speed control
  • 120 × 32 mm frame fits standard 120 mm mounts
  • 35 A draw keeps power consumption low

120 mm 48 V case fan

This Zyvpee DA12032B48U P003 is a 120 by 32 millimetre case fan built for 48 volt DC systems. It draws 0.35 amps and uses a four-pin power connector. The black frame carries a two-ball bearing and no LED lighting.

Suited for 48 V industrial or server chassis

Builders working with 48 volt power distribution can use this fan directly without a step-down converter. Buyers who need a fan for common 12 volt desktop boards should look elsewhere because the voltage is not compatible.

48 V 0.35 A four-pin power requirement

The single specification that decides fit is the 48 volt 0.35 amp rating on the four-pin header. If your chassis or controller supplies that exact voltage and connector, the fan will operate; otherwise it will not.

Highlights

  • Dual-ball bearing for longer service life
  • 48 V DC input suits industrial or server chassis
  • Four-pin PWM connector enables automatic speed control
  • 120 × 32 mm frame fits standard 120 mm mounts
  • 35 A draw keeps power consumption low

Specifications

Brand3ccooler.com
SeriesDA12032B48U P003
ModelDA12032B48U
TypeCase Fan
Bearing Type2 Ball
Power Connector4 Pin
ColorBlack
LEDNon-LED
FeaturesPower Cooling
Dimensions120*32mm

Questions about this item

Will this 48 V 0.35 A 4-pin fan connect to my existing 12 V motherboard header?

No — the fan requires a 48 V supply and its 4-pin connector is not compatible with standard 12 V motherboard headers.

How can I confirm the DA12032B48U is spinning correctly after installation?

Connect it to a 48 V source, then verify the 4-pin tachometer signal reports a stable RPM in your monitoring software or BIOS.

What comes in the box with the 120×32 mm 2-ball-bearing unit?

Only the fan itself; mounting screws, PWM cable adapters or a 48 V power supply must be purchased separately.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.