Zyvpee
Zyvpee DA07020T12U PS01 70mm 7020 12V .7A 4 Pin case fan
A 70 mm ball-bearing case fan with a 4-pin connector running at 12 V and .7 A for CPU cooling
- TypeCPU Cooler Fan
- Bearing TypeBall
- Power Connector4 Pin
- ColorBlack
- LEDNon-LED
- FeaturesCPU Cooling
- 70 mm frame fits tight chassis spaces
- 20 mm thickness balances airflow and clearance
- 12 V .7 A draw keeps power use low
- 4 pin connector enables PWM speed control
- Ball bearing design supports continuous operation
Compact 70 mm case fan
The Zyvpee DA07020T12U PS01 is a 70 mm by 20 mm case fan designed for tight chassis spaces. It runs on a 12 V supply drawing .7 A and connects via a standard 4 pin PWM header. The black, non-LED frame uses a ball bearing for continuous operation.
Builders with restricted clearance
This fan suits small-form-factor cases, slim CPU coolers or GPU shrouds that only accept a 70 mm mounting pattern. It is not suited for builds that require higher airflow volumes or larger frame sizes. Buyers needing RGB illumination or silent-optimised bearings should consider other options.
4 pin PWM control
The 4 wire connector enables motherboard speed control through PWM signalling, allowing the fan to scale with thermal load. This single interface detail determines whether the fan can be regulated automatically or will run at fixed voltage.
Highlights
- 70 mm frame fits tight chassis spaces
- 20 mm thickness balances airflow and clearance
- 12 V .7 A draw keeps power use low
- 4 pin connector enables PWM speed control
- Ball bearing design supports continuous operation
Specifications
| Brand | 3ccooler.com |
|---|---|
| Series | DA07020T12U PS01 |
| Model | DA07020T12U |
| Type | CPU Cooler Fan |
| Bearing Type | Ball |
| Power Connector | 4 Pin |
| Color | Black |
| LED | Non-LED |
| Features | CPU Cooling |
| Dimensions | 70*20mm |
Questions about this item
Does my motherboard need a 4-pin PWM header to run this 70mm fan?
Yes, the fan uses a 4-pin connector that plugs directly into a standard 12V PWM header on the motherboard.
Will the 70*20mm frame fit the same mounting holes as my old 70mm fan?
The 70mm square frame with 20mm thickness matches the standard 7020 mounting pattern used by most 70mm case fans.
How can I confirm the ball bearing is spinning correctly after installation?
Check the BIOS or fan-control software for a stable RPM reading from the 4-pin header and listen for smooth, quiet operation.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114903BTC
In stock
