Zyvpee
Zyvpee AFB0712LB 7015 70mm 12V .14A 3-pin ball-bearing case fan
A 70 mm ball-bearing case fan with a 3-pin connector running at 12 V and 0.14 A
- TypeCase Fan
- CompatibilityCase
- Bearing TypeBall
- Power Connector3 Pin
- ColorBlack
- LEDNon-LED
- Efficient cooling with 70 mm frame and 15 mm depth
- Low power draw of 0.14 A at 12 V for energy savings
- Ball bearing design ensures long-lasting smooth operation
- Simple 3-pin connector fits standard motherboard headers
- Non-LED black finish keeps builds clean and professional
Zyvpee AFB0712LB 70mm 12V case fan
The Zyvpee AFB0712LB is a 70mm case fan designed for system builders who need targeted airflow in tight chassis spaces. It operates on 12V power drawing 0.14A and uses a ball-bearing motor for continuous cooling duty. The 3-pin connector provides direct voltage control without PWM signalling. This unit suits compact enclosures or secondary intake positions where a 70mm frame is required.
3-pin ball-bearing installation notes
Mounting uses standard 70mm hole spacing with four corner screws; the 15mm thickness fits most side-panel or drive-bay brackets. The three-wire lead carries power, ground and a tachometer signal so the motherboard can report fan speed. A common issue is reversed polarity if the connector key is ignored, which prevents the tachometer from working. Ensure the keyed shroud aligns with the header tab before applying force.
12V 3-pin voltage control limits
Speed varies only with the voltage supplied on the 12V rail; there is no fourth wire for PWM duty-cycle input. At full 12V the fan draws 0.14A and delivers its rated airflow, but lower voltages reduce speed linearly until the ball-bearing motor stalls. Builders who need automatic temperature curves tied to PWM headers will find this interface cannot support that function. The 3-pin design also lacks onboard speed profiles or soft-start circuitry.
Highlights
- Efficient cooling with 70 mm frame and 15 mm depth
- Low power draw of 0.14 A at 12 V for energy savings
- Ball bearing design ensures long-lasting smooth operation
- Simple 3-pin connector fits standard motherboard headers
- Non-LED black finish keeps builds clean and professional
Specifications
| Series | AFB0712LB |
|---|---|
| Model | AFB0712LB |
| Type | Case Fan |
| Compatibility | Case |
| Bearing Type | Ball |
| Power Connector | 3 Pin |
| Color | Black |
| LED | Non-LED |
| Features | DC square Cooler |
| Dimensions | 70*70*15mm |
Questions about this item
How can I confirm the 70mm ball-bearing fan is spinning correctly after installing it in my case?
Connect the 3-pin header to the motherboard, power on the system and verify the 12V 0.14A motor starts smoothly; listen for steady airflow from the 70×15mm frame without rattling.
What comes with the AFB0712LB and what must I source separately?
The package includes the 7015-series 70mm black non-LED fan with its attached 3-wire cable; mounting screws, fan filters or PWM controllers are not included.
Which AFB0712LB variant should I choose for a standard 12V case-cooling slot?
Select the 12V 0.14A 3-pin ball-bearing model — it matches a typical 70mm case opening and provides DC square cooler airflow without LED lighting.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114437BTC
In stock
